Jump to content

Room Design for max dupes and decor


Recommended Posts

8 compfy beds alone takes up a full 64 tiles

Only way to get decor in that is have all walls made with window tiles and have paintings/statues on the other side

Decor use to transmit though airflow tiles but that was removed in QoL, you might be remembering a picture from before then.

only 4 beds but max decor you can achieve (hanging plants and metal tile floors)

image.thumb.png.767603d64bb801c21610256201faff03.png

image.thumb.png.2e5aa0169717b9f1dfc003ce2a501565.png

 

2 hours ago, Neotuck said:

8 compfy beds alone takes up a full 64 tiles

Only way to get decor in that is have all walls made with window tiles and have paintings/statues on the other side

Decor use to transmit though airflow tiles but that was removed in QoL, you might be remembering a picture from before then.

It does transmit through pneumatic doors so if OP wants to use a semi-exploit, he can put pneumatic doors above and below the 2 high room with 8 comfy beds, and then have 2 high rooms above and below with metal tiles and hanging plants.

1 hour ago, Neotuck said:

8 compfy beds alone takes up a full 64 tiles

Only way to get decor in that is have all walls made with window tiles and have paintings/statues on the other side

Decor use to transmit though airflow tiles but that was removed in QoL, you might be remembering a picture from before then.

When I hover over rooms in the decor tab it says max decor +120? Is that the actual limit now?

9 hours ago, chemie said:

No.  The tooltip is wrong; dups still gain the total; just watch the dup and hover over decor

I observed the same. As far as I can see, the old cap of 1000 for area decor is still in effect. As I am currently doing a map with no decor at all (just to see whether that works, and yes, it does), I cannot verify it.

Incidentally, here is the "extreme decor" variant for cots that I used before the permeable tiles started blocking it:

decor01.thumb.jpg.473f25b4b89ac646b94e3ba0a5f0a62d.jpg

Would have to be updated to use mostly glass tiles and be even more impressive with all gold metal statues. 

The rules for bedrooms are:

-Maximum of 64 tiles

-Comfy bed

-No cots

-Ceiling height of 4 tiles

-Decor item

 

The 64 tile size limit means that it is impossible to fit 8 beds into a single bedroom, because one bed is 4x2. Usual 64 tile designs have 3 or 4 beds. (3 is necessary to deal with loud sleepers).

 

Depending on how the ceiling height is determined however, it might be possible to squeeze 6 beds into a single bedroom using a two storey/bunk bed layout, but that would really be the limit.

4 hours ago, Arcus2611 said:

The 64 tile size limit means that it is impossible to fit 8 beds into a single bedroom, because one bed is 4x2. Usual 64 tile designs have 3 or 4 beds. (3 is necessary to deal with loud sleepers).

That is purely wrong. If one bed is 4x2 then it's 8 tiles. 64/8 is 8. So it's possible. You just can't put anything more in the room.

 

39 minutes ago, Miravlix said:

You guys do know that decor has a cap at 120?

I've read recently on the forum that it's only a tooltip. The rule is not implemented yet it seems so you can still over decorate your base even if it says it's not working.

56 minutes ago, Miravlix said:

You guys do know that decor has a cap at 120?

 

Those rooms has 340 decor pr. tile, bit of a waste.

 

8 small paintings and 4 comfy beds and I think every tile gets 120+ decor, it's not rocket science or complicated.

Again, the tooltip is wrong on this. The morale advantage you can get out of it is capped, but the decor value is not in the background calculations despite the tooltip saying it is.

21 minutes ago, Christophlette said:

That is purely wrong. If one bed is 4x2 then it's 8 tiles. 64/8 is 8. So it's possible. You just can't put anything more in the room.

I would be interested to see how you fit 8 beds in a 64-tiles room. The best I can think of is 7 beds until Klei introduce hanging-bed.

14 minutes ago, gbudiman said:

I would be interested to see how you fit 8 beds in a 64-tiles room. The best I can think of is 7 beds until Klei introduce hanging-bed.

Like @Le0n1des said. By making the room 32 x 2. Doors do not count in the 64 tiles space. So 64 tiles fits in 64 tiles...

13 minutes ago, Christophlette said:

Like @Le0n1des said. By making the room 32 x 2. Doors do not count in the 64 tiles space. So 64 tiles fits in 64 tiles...

Lol duh it's that time of the night 

32 minutes ago, Le0n1des said:

By making a 32 x 2 room... Would be quite ugly though

But wait... If decor goes through window tiles, that means you will get massive decor bonus from paintings/statues from both upper and lower "aisle"

16 minutes ago, Nitroturtle said:

You guys talking about fitting 8 beds in a bedroom need to take another look at the additional room requirements.

I believe the current requirements aren't actually required to get the associated bonusses, though in my experience relying on missing features will lead to a lot of problems when they eventually are actually required.

Bedrooms have to be 4 tiles high, at least according to the states criteria in the game. That mans maximum horizontal length is 16 tiles, i.e. 4 comfy beds. For Barracks (only +1 morale, not +2 like a Bedroom), you can fit in 8 comfy beds as they can be just 2 tiles high. The Barracks also do not need that decor item that is mandatory in a Bedroom.

16 hours ago, Christophlette said:

Like @Le0n1des said. By making the room 32 x 2. Doors do not count in the 64 tiles space. So 64 tiles fits in 64 tiles...

Honestly I was only considering the bedroom requirements and so forgot you could do that.

But yeah, bedrooms have to be 4 tiles high, so you could do a 2x32, but it would only count as a barracks. At that point I would just use cots instead.

8 minutes ago, Mariilyn said:

I posted this example a while ago, but it was 4 (37 tiles) bedrooms with 4 comfy beds each. Very compact design. The ceiling doesn't need to be 4 tiles high everywhere in the bedroom.

5c3407416428f_Capturedecran2018-10-21a02_08_51.thumb.png.fcc0008464e49b9c4cffb67c93d6513d.png

This is what needs to be done to get more than 4 comfy beds in a bedroom. Note that these rooms are 5 tiles tall which is exactly what you need to do to get 6 (maybe 7?) comfy beds in a bedroom. 

The picture is a bit misleading however since there is a second set of doors set to be open down the center that are near impossible to see, which divides this into 4 bedrooms, not the 2 seen at first glance. 

Thanks for sharing this compact design Mariilyn. Not much decor but I like it. 

1 hour ago, Mariilyn said:

I posted this example a while ago, but it was 4 (37 tiles) bedrooms with 4 comfy beds each. Very compact design. The ceiling doesn't need to be 4 tiles high everywhere in the bedroom.

5c3407416428f_Capturedecran2018-10-21a02_08_51.thumb.png.fcc0008464e49b9c4cffb67c93d6513d.png

Since it does not really matter whether it is 2 bedrooms or 4, this is a very nice compact design. Also good to know the 4 tiles in one place are enough.

6 hours ago, Arcus2611 said:

Honestly I was only considering the bedroom requirements and so forgot you could do that.

But yeah, bedrooms have to be 4 tiles high, so you could do a 2x32, but it would only count as a barracks. At that point I would just use cots instead.

@Le0n1des : My bad on that. Arcus2611 put his finger on a thing. I forgot the room had to be 4 tiles high.

Archived

This topic is now archived and is closed to further replies.

Please be aware that the content of this thread may be outdated and no longer applicable.

×
  • Create New...