Oni Noob Posted September 30, 2018 Share Posted September 30, 2018 Is the bug in the Refinery have been solve? the water is getting heated up to 200c without any reason Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/ Share on other sites More sharing options...
Sasza22 Posted September 30, 2018 Share Posted September 30, 2018 It happens when the output gets blocked. I think the bug is still there but if you don`t get your pipe blocked or randomly broken you`ll be fine. If you get extra water stuck inside you can use the empty storage tool before starting new recipies so it won`t get superheated. Just need to keep an eye on the refinery and the coolant flow. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1088975 Share on other sites More sharing options...
phod Posted September 30, 2018 Share Posted September 30, 2018 I've taken to adding a pipe liquid sensor paired with a filter gate that temporarily disables the refinery until the coolant has stopped flowing. Some builds probably don't need this, but it's extra insurance. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089071 Share on other sites More sharing options...
TitanCat Posted September 30, 2018 Share Posted September 30, 2018 Me2, got a refinery with 7 ton of 300 Celcius+ of water for some reason, emptying it would've been a total suicide, so I just leave it be as it is. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089075 Share on other sites More sharing options...
phod Posted September 30, 2018 Share Posted September 30, 2018 TitanCat, You can use the empty button in the refinery menu, the water will be ejected in a bottle that can be emptied. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089078 Share on other sites More sharing options...
Sasza22 Posted September 30, 2018 Share Posted September 30, 2018 2 hours ago, phod said: You can use the empty button in the refinery menu, the water will be ejected in a bottle that can be emptied. 300oC will change to steam instantly and damage the dupes as well as heat up the area. You need to empty the machine bofere the stuck water goes over 100oC. If it does the only way to empty it safely is to seal it off and deconstruct using the corner build exploit, then cool the steam somehow. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089132 Share on other sites More sharing options...
Neotuck Posted September 30, 2018 Share Posted September 30, 2018 This is why I stopped using PW as coolant Oil or petroleum works better and the boiling point is much higher Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089135 Share on other sites More sharing options...
SamLogan Posted October 1, 2018 Share Posted October 1, 2018 On 30/09/2018 at 6:32 AM, Oni Noob said: Is the bug in the Refinery have been solve? the water is getting heated up to 200c without any reason It's not a bug, the old state where we were able to use polluted water endlessly was a bug. The coolant heat up 200°C when you refined Steel because it's an high temperature reffinery. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089334 Share on other sites More sharing options...
Oni Noob Posted October 2, 2018 Author Share Posted October 2, 2018 6 hours ago, SamLogan said: It's not a bug, the old state where we were able to use polluted water endlessly was a bug. The coolant heat up 200°C when you refined Steel because it's an high temperature reffinery. Oh I see I was refining steel at it But I dont get it, it supposed to remove the water it used, but somehow the water that was stored in side the refinery just increase in temperature in no particular reason. And my refinery output is not blocked out in anyway Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089481 Share on other sites More sharing options...
Zarquan Posted October 2, 2018 Share Posted October 2, 2018 14 minutes ago, Oni Noob said: Oh I see I was refining steel at it But I dont get it, it supposed to remove the water it used, but somehow the water that was stored in side the refinery just increase in temperature in no particular reason. And my refinery output is not blocked out in anyway Maybe you could use automation to turn it off until you remove all the coolant. This could be done with a pipe sensor on the output. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089484 Share on other sites More sharing options...
SharraShimada Posted October 2, 2018 Share Posted October 2, 2018 3 hours ago, Zarquan said: Maybe you could use automation to turn it off until you remove all the coolant. This could be done with a pipe sensor on the output. Sure, IF the liquid comes out at all. The glass forge is currently buggy, causing "cold damage" at the output pipe, making it break every 4 cycles. Setting it on repeat, causing liquid glass at serveral hundret degree to remain in the forge. Its no fun, when a dupe repairs the pipe, and tons of liquid glass come out, melting the whole area. Same goes for liquids in the metal refinery. Sometimes it just stays in the refinery for no real reason, heating up and up. The moment its released, you can watch melt everything. For now, its a bug, that needs to be fixed soon. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089542 Share on other sites More sharing options...
tzionut Posted October 2, 2018 Share Posted October 2, 2018 Quote The glass forge is currently buggy, causing "cold damage" at the output pipe, Try using insulated abbysalite as pipe and you will escape this problem...The cold damage is because the liquid glass solidify in the pipe breaking it. I use a loop whit an liquid storage for heating purpose... Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089557 Share on other sites More sharing options...
Saturnus Posted October 2, 2018 Share Posted October 2, 2018 Just put a filter directly after the glass forge output via a single piece of insulated abyssalite pipe, limiting output flow in pipes after to 1000g/s which makes the pipes ignore state changes. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089587 Share on other sites More sharing options...
Sasza22 Posted October 2, 2018 Share Posted October 2, 2018 16 hours ago, tzionut said: Try using insulated abbysalite as pipe and you will escape this problem...The cold damage is because the liquid glass solidify in the pipe breaking it. I use a loop whit an liquid storage for heating purpose... Also make sure there`s no liquid at the base of the forge. It will interact with the molten glass and cause it to solidify when leaving the forge. Link to comment https://forums.kleientertainment.com/forums/topic/95981-refinery-problem/#findComment-1089754 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.