Miravlix Posted February 25, 2019 Share Posted February 25, 2019 Does the aquatuner scale the heat creation based on the amount of liquid it cools pr. packet? Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/ Share on other sites More sharing options...
Lilalaunekuh Posted February 25, 2019 Share Posted February 25, 2019 30 minutes ago, Miravlix said: Does the aquatuner scale the heat creation based on the amount of liquid it cools pr. packet? Yes, the moved heat scales with the tuned liquid and the amount of liquid. Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/#findComment-1159274 Share on other sites More sharing options...
JohnFrancis Posted February 25, 2019 Share Posted February 25, 2019 37 minutes ago, Lilalaunekuh said: Yes, the moved heat scales with the tuned liquid and the amount of liquid. Fun fact you can't cool super coolant to freezing in an aquatuner. Once it get's low enough it can't go any further. So if you are say using an aquatuner for a heat source and don't dispose of the cooling so the super coolant bottoms out, the aquatuner will stop producing heat even though it's running. This could cause your petroleum boiler to mess up contaminate your heat exhanger with crude and force you to spend 20 cycles cleaning the mess up.... Happened to a friend of mine. Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/#findComment-1159319 Share on other sites More sharing options...
ishakaru Posted February 25, 2019 Share Posted February 25, 2019 Wait, doesn't the aquatuner wait until it has a 10kg packet before doing anything? so a 1g valve would make it wait 10000 seconds? Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/#findComment-1159324 Share on other sites More sharing options...
goatt Posted February 26, 2019 Share Posted February 26, 2019 11 hours ago, ishakaru said: Wait, doesn't the aquatuner wait until it has a 10kg packet before doing anything? so a 1g valve would make it wait 10000 seconds? It will process 1g right away and still cost 1200 W Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/#findComment-1159472 Share on other sites More sharing options...
chemie Posted February 26, 2019 Share Posted February 26, 2019 22 hours ago, nakomaru said: It will process whatever packet you throw at it, consume 1200J, reduce its temp by 14K (min >0K), and output the packet's mass*spec heat*14K into the vicinity. not if the outlet is backed up. then it only processes 10 kg packets once it outlet is free, and same for power Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/#findComment-1159565 Share on other sites More sharing options...
chemie Posted February 26, 2019 Share Posted February 26, 2019 1 hour ago, nakomaru said: I'm pretty sure it will be happy to process a 100g packet after being freed also. no it does not do this. it processes only 10 kg packets when the outlet flow is less than 10 kg.s and not open vent discharge Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/#findComment-1159590 Share on other sites More sharing options...
KittenIsAGeek Posted February 27, 2019 Share Posted February 27, 2019 9 hours ago, chemie said: no it does not do this. it processes only 10 kg packets when the outlet flow is less than 10 kg.s and not open vent discharge 6 hours ago, nakomaru said: Sure it will, just put 100g of a different element in between. I think the difference in viewpoints is that @chemie has the valve after the aquatuner, on the output side, while @nakomaru has the valve on the input side, in front of the aquatuner. Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/#findComment-1159725 Share on other sites More sharing options...
chemie Posted February 27, 2019 Share Posted February 27, 2019 7 hours ago, KittenIsAGeek said: I think the difference in viewpoints is that @chemie has the valve after the aquatuner, on the output side, while @nakomaru has the valve on the input side, in front of the aquatuner. It does not matter as long as the outlet pipes is "backed up" meaning full of packets and any flow less than 10 kg/s. You do not need a valve. Example might be running wheat or berries where the flow is continuous, less than 10 kg/s, and the pipe is "full". The aquatuners only run when there is a 10 kg packet space on its outlet. You need a valve if the other end is a vent to prevent open flow, so then it needs to be on outlet. Link to comment https://forums.kleientertainment.com/forums/topic/103293-liquid-valve-1gs-aquatuner-water-10-kgs-aquatuner/#findComment-1159819 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.