Tonyroid Posted November 4, 2019 Share Posted November 4, 2019 This was originally developed by @mathmanican. See the forum post for a lot more information about it. Link to comment https://forums.kleientertainment.com/forums/topic/113322-pump-large-quantities-of-gas-from-room-to-room-in-seconds/ Share on other sites More sharing options...
biopon Posted November 4, 2019 Share Posted November 4, 2019 Neat presentation, and is that 2-gas solution your own? It looks pretty useful. The water deletion is explained in the main thread I think, but the gist of it is that liquids need to be 10g or more in order to form a tile. Anything less than that is deleted. Link to comment https://forums.kleientertainment.com/forums/topic/113322-pump-large-quantities-of-gas-from-room-to-room-in-seconds/#findComment-1280490 Share on other sites More sharing options...
Tonyroid Posted November 4, 2019 Author Share Posted November 4, 2019 6 hours ago, biopon said: Neat presentation, and is that 2-gas solution your own? No. Someone in the original thread figured that out, which is nice because I didn't have to do any experimenting on my own. @Sigma Cypher Link to comment https://forums.kleientertainment.com/forums/topic/113322-pump-large-quantities-of-gas-from-room-to-room-in-seconds/#findComment-1280548 Share on other sites More sharing options...
silverbluep Posted November 4, 2019 Share Posted November 4, 2019 I like the method. However, it swaps tile contents, so it's efficiency is directly linked to the global pressure in the other room. It could be useful up to a certain degree, then pumps will be superior; so i suggest both solutions. I can't think of practical applications though. What are your future plans? For high pressure gas storage, I think a bead in front of air vent works better. I guess verdante maps without any thermium would benefit from being able to store hot gasses like this; since no 500 C resistant pipes exist. But that is speaking more to the oversight of tungsten without cold biomes rather than anything else. Link to comment https://forums.kleientertainment.com/forums/topic/113322-pump-large-quantities-of-gas-from-room-to-room-in-seconds/#findComment-1280599 Share on other sites More sharing options...
Siromatik Posted November 5, 2019 Share Posted November 5, 2019 9 hours ago, silverbluep said: For high pressure gas storage This setup actually over-pressure gas in the top room, and his efficiency is NOT directly linked to the global pressure. Only issues that can occurs is a gas deletion with multiples gas and small pockets. Nevermind, missed the 1000kg liquid vent overpressured by the gas part, so much thing to keep in mind meh Link to comment https://forums.kleientertainment.com/forums/topic/113322-pump-large-quantities-of-gas-from-room-to-room-in-seconds/#findComment-1280710 Share on other sites More sharing options...
nakomaru Posted November 5, 2019 Share Posted November 5, 2019 I use it to keep a vacuum for 1000T of PH2O in a tile to off gas. It works very well if your room that your are taking material from is very small. Link to comment https://forums.kleientertainment.com/forums/topic/113322-pump-large-quantities-of-gas-from-room-to-room-in-seconds/#findComment-1280711 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.