Jump to content

Buildings output temperature (Complete List)


Recommended Posts

Well I revisited the list and went through all the buildings that have outputs (If im missing one let me know)

Oxygen buildings

  1. Algae Deoxidizer outputs at 30 C
  2. Algae Terrarium 30 C (both)
  3. Carbon skimmer outputs at 40 C
  4. Electrolyzers output at 70 Celsius (both hydrogen and oxygen)

Power Buildings

  1. Coal Generator outputs at 37 C
  2. Natural generator outputs at own temperature (both)
  3. Petroleum generator outputs at own temperature (both)

Plumbing buildings

  1. Lavatory outputs at reserve temperature (thanks to @Kabrute)
  2. Shower outputs at reserve temperature

Refinement buildings

  1. Water sieve outputs at 40 C
  2. Fertilizer synthesizer - fertilizer 50 C - Natural gas 29.85 C (Thanks to @neoazureus)
  3. Compost outputs at 75 C
  4. Algae Distiller 30 C (both)
  5. Oil refinery outputs at 75 C (both)
  6. Polymer Press - Plastic 75 C - Steam 200 C (thanks to @neoazureus) CO2 150 C

Utilities

  1. Oil well - Oil 90 C - Gas 300 C

Bellow is a table showing how much temperature each coolant will gain refining the different metals on a metal refinery.

The metal always comes out at 40 C

5afbb74716788_metalrefinery.thumb.png.8019bdc9be06fafcfbd153a9a959ea35.png

 

Chart (thanks to @R9MX4)

1.thumb.png.59611d787972f6e37129957c17af759d.png.e9b345449d89c4472f43e60097177dc6.png

 

Link to comment
Share on other sites

20 minutes ago, Kabrute said:

 

metal refinery outputs at input +(based on material smelted)(iron is highest observed)

thermal tuners output is input -14c

 

I've left those kind of building out on purpose... if u have a chart of the refinery i can add it..

Link to comment
Share on other sites

2 hours ago, eloy2030 said:
  1. Fertilizer synthesizer 46 C (both)6.

       6. Polymer Press - Plastic 75 C - Steam & CO2 150 C

they are experimental data ? They are not obtained from the code ?

Fertilizer synthesizer: Fertilizer = 50°C, natural gas = 29.85°C

 

Link to comment
Share on other sites

2 minutes ago, JonnyMonroe said:

Hey R9 any interest in adding a birth temperature list to the biology post if I throw the table for it together?

Their birth temperature is the Average of Low and High Comfort Temperature

The poop temperature is body temperature

The water temperature cleaned by gulp fish is 9C

 

I will add them. Thanks.

Link to comment
Share on other sites

40 minutes ago, R9MX4 said:

Why remove your old list? It's more accurate than this one:?

what? please extend that coment...

2 hours ago, neoazureus said:

your data and code does not match:

Polymer Press: Plastic 75°C, Steam 200°C, CO2 150°C

tks, was a mistake on my part

edited...

Link to comment
Share on other sites

16 minutes ago, R9MX4 said:

I mean this one thread. The data listed in this thread is still right.

Some are old some missing... besides, HOW is more acurate? @R9MX4 (edited, in case u already saw it)

20 minutes ago, neoazureus said:

And Fertilizer synthesizer: Fertilizer = 50°C, natural gas = 29.85°C

Done, tks!

Hey, while u r at it, im trying to compile a chart of metal refinery coolants and output temp for each metal and liquid. But if my math is not wrong liquid is coming out a little cooler than it should, could u check it out?

Link to comment
Share on other sites

1 hour ago, eloy2030 said:

But if my math is not wrong liquid is coming out a little cooler than it should, could u check it out?

How much less ? 20% less ?

I see a factor of 0.8 for the liquid coolant. But i'm not sure

LIQUID_COOLED_HEAT_PORTION = 0.8f;

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Please be aware that the content of this thread may be outdated and no longer applicable.

×
×
  • Create New...