Jump to content

Recommended Posts

23 hours ago, Sustenance said:

image.png.219acdbe1a2eb6d81519004b32c2a771.png

Yes this is just missing a 3 at the end
You do these in rounds
Round A -> 1 3 2 
Round B -> 2 3 1
Round C -> 3 2 1
Round D -> 1 2 3


Trying to figure out how to control the machine now

Edited by Juanasdf

Click on this little thing here~image.png.26d7577d4e9c20f7dd480a8babf2789d.png

It's a little storage space below the red button.

Edit: Seems as if almost everything on the panel up above and the panel next to it is interactable... Levers, switches, etc, etc.
We just need to figure out the order we do it in I guess. I set everything to max and all of the screens turned glaring red.

image.png.080a1f801605f564253f14637b10abd2.png

They won't let me blow up the old geezer :(

Edited by Nikki Darks
3 minutes ago, Ugur01 said:

Help me, I’m stuck at this stage. I’m pressing in the correct order, but it’s not working. How should the start be — should all the plugs be connected?

Ekrangrnts2025-11-10214132.png.a5d9e635f3f8208c9962fc2eb3802b0a.png

I started from the plugs all in, the way it appeared initially. I did plug and unplug them a bunch before doing them following the order on the written note so I think it should be fine if you just plug them all back in again and go from there.

  • Like 2
3 minutes ago, Ugur01 said:

Help me, I’m stuck at this stage. I’m pressing in the correct order, but it’s not working. How should the start be — should all the plugs be connected?

Ekrangrnts2025-11-10214132.png.a5d9e635f3f8208c9962fc2eb3802b0a.png

Yes, initially everything is enabled, then you click in the correct order.

  • Like 1
21 minutes ago, alainmcd said:

image.png.5ece9fc2cb9d780fd7cfe015bdb1ed3e.png

Turn up everything you can, it'll start flashing red. You can pull these up:

image.png.cf4e27a0666534ae74e46c562760e96b.png

 

You can also pull the lever on the right, but it doesn't seem to stay up.

From people currently solving it on Kleicord:

 - The goal is to fully raise the rightmost lever without overloading any of the systems (from left to right, Power, Steeam, Battery and Heat)

 - Each knob controls its system, while the rightmost lever will affect the others (i cannot fully explain)

 - Steam and Heat have a single reset via the red buttons below them

  • Like 1
38 minutes ago, Ricorchik said:

Yes, initially everything is enabled, then you click in the correct order.

I was clicking on the plugs according to the numbers there, thinking they indicated how many times to click, but they actually showed the click order.

Edited by Ugur01
1 hour ago, Juanasdf said:

Yes this is just missing a 3 at the end
You do these in rounds
Round A -> 1 3 2 
Round B -> 2 3 1
Round C -> 3 2 1
Round D -> 1 2 3


Trying to figure out how to control the machine now

How is Round B 231 and not 312?

 

image.png.fb5294464c2bb9912ed319d1fd0cac4e.png

  • Like 2
  • Big Ups 1

I was stuck at the fourth push of the control lever. No matter how I adjusted it, the leftmost instrument would enter the red zone after the fourth push of the control lever.

These are my first three operations:

  1. left power controller up two grids,      push control lever.
  2. left power controller up two grids,       push control lever.
  3. Red button,                                              push control lever.
Edited by Cassielu

 

1 hour ago, Juanasdf said:

Yes this is just missing a 3 at the end
You do these in rounds
Round A -> 1 3 2 
Round B -> 2 3 1
Round C -> 3 2 1
Round D -> 1 2 3


Trying to figure out how to control the machine now

I might be stupid because it doesnt work-

Just now, Doktoberfest said:

I might be stupid because it doesnt work-

33 minutes ago, Ugur01 said:

I was clicking on the plugs according to the numbers there, thinking they indicated how many times to click, but they actually showed the click order.

 

Just now, alainmcd said:

I don't think breaking it is the objective.

we need to get the lever on the right all the way up without overloading the control panel

this image has step by step on how to get it pretty high but me and the people on the biddobams discord are stuck at the last step so we'ce kind of given up and waiting for someone to solve it

guide.webp

  • Like 3
  • Shopcat 1
11 minutes ago, Baark0 said:

what exactly am i doing wrong with the cords? im clicking them in the correct order but nothing else is happening anywhere

They have to be all plugged in before you start the order
then you click on the first one, then third one, then second one.
then second one, then third one, then first one.
then third one, then second one, then first one,

then first one, then second one.

  • Health 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
  • Create New...