Major SNAFU Posted February 18, 2018 Share Posted February 18, 2018 Hi all, I had a design, copied from these forums for a 4x6 enclosure for a pump, electrolyzer and filter. Used to work a treat. Built one in a new game and now, when I try to pump Hydrogen via a pipe (made from anything, including abyssallite) and passing through a wall the pipe breaks due to heat as soon as the first hydrogen packet passed into it. If I re-route the pipe to pass through the door, then this no longer happens to the hydrogen pipe (regardless of what I make it out of) , but then the oxygen pipe, which had always been passing through the door then breaks - but not at the door, but rather at the 90 segment two segments past the door. The oxygen in the pipe is 97.2 degrees. again, regardless of what I make the pipe out of it breaks, and always at the same spot. I used to use this design, even in stacks with no heat issues at all. I am going to have to revert to and open type electrolyzer setup and hope the pipes don't overheat - but I don't understand why they are overheating now in the first place. Is anyone seeing anything similar to this? SNAFU Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/ Share on other sites More sharing options...
Kabrute Posted February 18, 2018 Share Posted February 18, 2018 This seems more like a bug than anything else, please repost this in the bug report section with a copy of your save file and, if possible, screen shots of the areas in question. Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1006051 Share on other sites More sharing options...
TehPlayer14 Posted February 18, 2018 Share Posted February 18, 2018 Also tell us more detail if it was +degrees or minus also the state of element is it gas or liquid Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1006052 Share on other sites More sharing options...
leeroyjenkemmms Posted February 18, 2018 Share Posted February 18, 2018 heat breaking my pipes at 40c Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1006070 Share on other sites More sharing options...
Major SNAFU Posted February 18, 2018 Author Share Posted February 18, 2018 Hi all, I will post a bug report with a save. To answer specific questions. Degrees in Fahrenheit; +97.2 was the temp of the oxygen that caused a heat breakage in the pipes as mentioned before. all gas, all the time. I am not that sophisticated in my game play yet. Going through a wall with the hydrogen is 100% breakage. Going through a door with hydrogen 0% breakage. Going through door oxygen 0% breakage UNLESS I am also passing the hydrogen through the same door, then heat breakage on teh oxygen pipe occurs 2-3 pipe segments after it has passed through the door. Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1006082 Share on other sites More sharing options...
TehPlayer14 Posted February 21, 2018 Share Posted February 21, 2018 On 19.02.2018 at 12:57 AM, Major SNAFU said: Hi all, I will post a bug report with a save. To answer specific questions. Degrees in Fahrenheit; +97.2 was the temp of the oxygen that caused a heat breakage in the pipes as mentioned before. all gas, all the time. I am not that sophisticated in my game play yet. Going through a wall with the hydrogen is 100% breakage. Going through a door with hydrogen 0% breakage. Going through door oxygen 0% breakage UNLESS I am also passing the hydrogen through the same door, then heat breakage on teh oxygen pipe occurs 2-3 pipe segments after it has passed through the door. Yeah posting save game could solve the issue right away Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007237 Share on other sites More sharing options...
Arash70 Posted February 21, 2018 Share Posted February 21, 2018 I also have this problem, gas/liquid normal/insulated pipes breaking because of heat/cold damage. Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007242 Share on other sites More sharing options...
Oozinator Posted February 21, 2018 Share Posted February 21, 2018 33 minutes ago, Arash70 said: I also have this problem, gas/liquid normal/insulated pipes breaking because of heat/cold damage. Can you post a savegame pls? Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007249 Share on other sites More sharing options...
Arash70 Posted February 21, 2018 Share Posted February 21, 2018 1 hour ago, Oozinator said: Can you post a savegame pls? Here Oozi Unstoppable Utopia.sav Piping's a bit of a mess though. Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007266 Share on other sites More sharing options...
Oozinator Posted February 21, 2018 Share Posted February 21, 2018 1 hour ago, Arash70 said: Here Oozi Unstoppable Utopia.sav Piping's a bit of a mess though. YOU KILLED FRANKIE!!!!!"§1231233 ^^ Hmm i added a pump for your MR, nothing breaks so far. Which stuff is breaking exactly? Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007291 Share on other sites More sharing options...
Arash70 Posted February 21, 2018 Share Posted February 21, 2018 Piping on the right all the way to electrolyzers. They used to break then I replaced them with abyssalite. Do you like the save btw? poor frankie died while digging. Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007292 Share on other sites More sharing options...
TehPlayer14 Posted February 21, 2018 Share Posted February 21, 2018 7 minutes ago, Arash70 said: Piping on the right all the way to electrolyzers. They used to break then I replaced them with abyssalite. Do you like the save btw? poor frankie died while digging. Its because they turned to solid ice and if stuff changes being state the pipes will break Also watch out you are cooling co2 almost at the condensation point -42C this will break pipes too Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007297 Share on other sites More sharing options...
Arash70 Posted February 21, 2018 Share Posted February 21, 2018 4 minutes ago, TehPlayer14 said: Its because they turned to solid ice and if stuff changes being state the pipes will break Also watch out you are cooling co2 almost at the condensation point -42C this will break pipes too I know, but some of the pipes were not at <0c Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007299 Share on other sites More sharing options...
TehPlayer14 Posted February 21, 2018 Share Posted February 21, 2018 2 minutes ago, Arash70 said: I know, but some of the pipes wasn't at <0c Remember that content of the pipe can only damage pipes Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007302 Share on other sites More sharing options...
Oozinator Posted February 21, 2018 Share Posted February 21, 2018 Just now, TehPlayer14 said: Its because they turned to solid ice and if stuff changes being state the pipes will break Also watch out you are cooling co2 almost at the condensation point -42C this will break pipes too I bet 0.8% of my left little toe, that you are right! 7 minutes ago, Arash70 said: Do you like the save btw? poor frankie died while digging. Most perfect base of all times! Clear to see, that you learned every bits and bytes from grandmaster @Lifegrow Was a hard way, to perfection i bet, but you got it! Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007303 Share on other sites More sharing options...
Arash70 Posted February 21, 2018 Share Posted February 21, 2018 5 minutes ago, Oozinator said: I bet 0.8% of my left little toe, that you are right! Most perfect base of all times! Clear to see, that you learned every bits and bytes from grandmaster @Lifegrow Was a hard way, to perfection i bet, but you got it! Nah, It's a mix of @CrypticFox Volx @GrindThisGame and @Lifegrow with a bit of my touch It's not still perfect, I wish that natural gas geyser wasn't there so I could make a perfect cube with the base. It is good enough though: Link to comment https://forums.kleientertainment.com/forums/topic/87780-ocupational-upgrade-heat-damaging-pipes/#findComment-1007305 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.