Lutzkhie Posted March 2, 2018 Share Posted March 2, 2018 i was just hoping that someone might have a oil refinery + polymer press prototype/design/blueprint whichever it is maybe you can post a Screenshot here Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/ Share on other sites More sharing options...
Kabrute Posted March 2, 2018 Share Posted March 2, 2018 weeze wort --- poly press ----- temp sensory ----- petrol refinery Set temp sensor to 5 above ambient temp and hook it to the press, let refinery run full on, weeze wort will keep temp even and the system will put out plastic forever without overheating. For me the temp I use is 25C and I build this setup in an ice biome Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010393 Share on other sites More sharing options...
Neotuck Posted March 2, 2018 Share Posted March 2, 2018 @Lifegrow made a good one in his youtube channel Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010414 Share on other sites More sharing options...
travaldofan Posted March 3, 2018 Share Posted March 3, 2018 can work really long really long before heats up Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010505 Share on other sites More sharing options...
Lutzkhie Posted March 3, 2018 Author Share Posted March 3, 2018 damn, i always forgot to make use of AETN i already found 4 on my seed 6 hours ago, Kabrute said: weeze wort --- poly press ----- temp sensory ----- petrol refinery Set temp sensor to 5 above ambient temp and hook it to the press, let refinery run full on, weeze wort will keep temp even and the system will put out plastic forever without overheating. For me the temp I use is 25C and I build this setup in an ice biome how many worts do i need per polypress? Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010510 Share on other sites More sharing options...
Kabrute Posted March 3, 2018 Share Posted March 3, 2018 I use 2 per press the press runs about 40% uptime Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010521 Share on other sites More sharing options...
travaldofan Posted March 3, 2018 Share Posted March 3, 2018 1 hour ago, Lutzkhie said: damn, i always forgot to make use of AETN i already found 4 on my seed how many worts do i need per polypress? millions if u want them constantly working i prefer AETN Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010526 Share on other sites More sharing options...
Tab1 Posted March 3, 2018 Share Posted March 3, 2018 I just gave up on the game cus i tried to oil cool the press, AETN hydrogen cooling and finally using the bug to cool it. After that the game lost its purpose to me. Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010611 Share on other sites More sharing options...
Kabrute Posted March 3, 2018 Share Posted March 3, 2018 need a puddle on the floor connecting your press to its surroundings and a single temp shift plate on the wall behind it to connect the surroundings together replace the mesh block under the press with a full tile Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010616 Share on other sites More sharing options...
Tab1 Posted March 3, 2018 Share Posted March 3, 2018 1 minute ago, Kabrute said: need a puddle on the floor connecting your press to its surroundings and a single temp shift plate on the wall behind it to connect the surroundings together that would provide enough cooling so that i can get rid of the heat loss bug Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010617 Share on other sites More sharing options...
Kabrute Posted March 3, 2018 Share Posted March 3, 2018 put a temp sensor in that little gap there and set it to 30c and hook it to the press Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010618 Share on other sites More sharing options...
Saturnus Posted March 3, 2018 Share Posted March 3, 2018 I'm actually doing a build in my current survival game that combines an oil refinery, 4 polymer presses, and a slicker farm into one unit to continuously make plastic from recycled CO2 until smart storage container is filled. It's not done yet but here's a a teaser. The output plastic is 24C. Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010620 Share on other sites More sharing options...
habuky Posted March 3, 2018 Share Posted March 3, 2018 all in one design (oil in, plastic out) 4 parallel presses all plastic drops on one spot close to the door CO2 is destroyed, but could easily be routed out production is limited by a pressure plate (no over production of neither plastic nor petroleum) enough splace to implement a conveyor if needed space efficient DISCLAIMER (apparently needed): potentially inspired by someone here in the forum no rights reserved Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010630 Share on other sites More sharing options...
travaldofan Posted March 3, 2018 Share Posted March 3, 2018 4 hours ago, Saturnus said: I'm actually doing a build in my current survival game that combines an oil refinery, 4 polymer presses, and a slicker farm into one unit to continuously make plastic from recycled CO2 until smart storage container is filled. It's not done yet but here's a a teaser. The output plastic is 24C. wow 24C plastic output i want i want show us more Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010662 Share on other sites More sharing options...
Lutzkhie Posted March 4, 2018 Author Share Posted March 4, 2018 finally.... but not yet complete once i replace the regular wires on refinery and pump, ill connect it directly to petroleum generators, remove coal generators replace with water seive then feed to electrolyzer, oxygen goes out of the room, hydrogen to AETN, also pump out all CO2 so that hydrogen will cover everything for quicker cooling, plastic is in good temp, might add conveyors. i got 11 or 12 slicksters just below it and its survival build, oil refinery + polymer press = the oil press engine mkII Link to comment https://forums.kleientertainment.com/forums/topic/88217-oil-press-engine/#findComment-1010968 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.