voqn Posted January 17, 2020 Share Posted January 17, 2020 A long time, I've been read several article about critter butchery (thanks to everyone). One day, I have an idea about it. Almost Critters cannot live in liquid (Hatch, Paft, Drecko, Slickster, Pip, Shovevole) Pokeshell cannot keep living in above 100℃ environment. "Hah, ok. If I can make above 150℃ Petroleum liquid elevator, can be it as all critter butcheries?" The demonstration is here. Notes before read it If you want to butchering critters without pokeshell, this system is redundant. If you want to butchering without Paft and Shinebug, there are more practical way than it. See also @Gamers Handbook's Critter Dropper And see @Tonyroid's Critter Killer Structure Shovevole cannot through diamond tiles. steel mesh tile, and steel doors. Internal Pneumatic-Door is to prevent breakout critters from frier chamber. Overflowed a bit petroleum for auto cooking omelette. Aquatuner don't require steel. Gold Amalgam is enough (rely on configuration) How it works Liquid pipeline About Aquatuner bypassing Logistics Automation Logic Circuit Don't forget safety logic by motion sensor. If you omit it, This room will be "Duplicant Deep Flyer" If you want to using GoldAmalgam for Aquatuner, Change thermo sensor above 150℃. GoldAmalgam AT's overheat temp is 175℃. Link to comment Share on other sites More sharing options...
OxCD Posted January 17, 2020 Share Posted January 17, 2020 As simple as it sounds, I've never thought about using a tepidizer to keep the AT producing heat where you want to. That's not the main point of this topic, but it made my day Link to comment Share on other sites More sharing options...
KILLABUDZ Posted January 17, 2020 Share Posted January 17, 2020 10 hours ago, OxCD said: I've never thought about using a tepidizer to keep the AT producing heat where you want to. My first steam rocket fuel chamber was a monstrosity of AT, tepi, and a CSV. Bloody cold Rime. Link to comment Share on other sites More sharing options...
suxkar Posted January 18, 2020 Share Posted January 18, 2020 Thank you for taking the time to go thrugh so much detail, this is a very neat and useful design. I'm not sure I completeyl understand the automation: what happens if there is a duplicant and a critter inside the fry room? Is the duplicant trapped? Link to comment Share on other sites More sharing options...
voqn Posted January 18, 2020 Author Share Posted January 18, 2020 1 hour ago, suxkar said: what happens if there is a duplicant and a critter inside the fry room? Is the duplicant trapped? Critter Sensor become RED Motion Sensor become GREEN These 2 signals combined OR-Gate. Result is GREEN While dups are in the room, the doors keep open. After dups leave from the room. Motion Sensor become RED OR-Gate's result become RED Butchering sequence will be start. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.