Dupes won't load fill Solid fuel thruster

[Bluefoxfire]

It keeps saying "awaiting delivery" but the dupes act like it doesn't even exist.

This is happening with both the Oxy and iron and they can reach both.

[leoroy]

Do you have a gantry leading to the solid fuel thruster?

[Bluefoxfire]

Wait, you have to have a gantry for that too? Seems...odd. But at least I know now. Thanks.

[Sasza22]

18 minutes ago, Bluefoxfire said:

Wait, you have to have a gantry for that too?

You need gantry for every deliver task to the rocket modules unless you use an auto sweeper or jet suits.

[Khullag]

3 hours ago, Bluefoxfire said:

Wait, you have to have a gantry for that too? Seems...odd. But at least I know now. Thanks.

you don't need gantry if you have jetsuits. also autosweepers deliver stuff to rockets (just be sure that autosweeper covers middle bottom tile of rotcket part to which you want to deliver)

[Gurgel]

4 hours ago, Bluefoxfire said:

Wait, you have to have a gantry for that too? Seems...odd. But at least I know now. Thanks.

You can have a ladder just right above. But only if there is no module above. The gantry is the easiest practical option.

[Bluefoxfire]

1 hour ago, Khullag said:

you don't need gantry if you have jetsuits. also autosweepers deliver stuff to rockets (just be sure that autosweeper covers middle bottom tile of rotcket part to which you want to deliver)

Actually tried the sweeper arm beforehand. Didn't work for some reason, even with proper placement.

[ruhrohraggy]

Running multiple gantries isn't too bad actually. If you have an automation to retract them, just put in a buffer gate for 5s between them. Each gantry will then retract 1 at a time, and save you the wiring hassle. Unless you already wired it up for a million watts, then do whatever I guess.

I only use normal high conductive wire for most things leading out of my generators.

[Gurgel]

14 minutes ago, ruhrohraggy said:

Running multiple gantries isn't too bad actually. If you have an automation to retract them, just put in a buffer gate for 5s between them. Each gantry will then retract 1 at a time, and save you the wiring hassle. Unless you already wired it up for a million watts, then do whatever I guess.

I only use normal high conductive wire for most things leading out of my generators.

I use individual controls on each gantry. The clock-sensor can be used in space for that.

[Bluefoxfire]

16 minutes ago, ruhrohraggy said:

Running multiple gantries isn't too bad actually. If you have an automation to retract them, just put in a buffer gate for 5s between them. Each gantry will then retract 1 at a time, and save you the wiring hassle. Unless you already wired it up for a million watts, then do whatever I guess.

I only use normal high conductive wire for most things leading out of my generators.

I actually went with the automation switches because my dupes were often too stupid to do it themselves, lol.

[ruhrohraggy]

This is how I'm rollin' at the moment. Like you said, the dupes are too stupid to do it themselves. So I set it up where they do nothing.

Spoiler