Blackbear0507 Posted December 10, 2017 Share Posted December 10, 2017 I wanted to know if anyone has had trouble with an electrolyzer just not working. I have one that has water running to it with a little food poisoning germs, but it ran on that before it stopped working. It has power, and the area it's in is never over-pressurized. It just stopped working one day for no apparent reason. I attached the save if anyone needs it, and sorry about the pipes. The Super Duper Paradise.sav Link to comment https://forums.kleientertainment.com/forums/topic/85300-electrolyzer-issues/ Share on other sites More sharing options...
Blackbear0507 Posted December 10, 2017 Author Share Posted December 10, 2017 After demolishing it and replacing it didn't work, I posted this. Then a while later I moved it one block to the left and it started working again. Link to comment https://forums.kleientertainment.com/forums/topic/85300-electrolyzer-issues/#findComment-983025 Share on other sites More sharing options...
PhailRaptor Posted December 10, 2017 Share Posted December 10, 2017 They will go on standby if the local atmosphere pressure reaches 2k just like the basic vent. Have you ruled that out? Link to comment https://forums.kleientertainment.com/forums/topic/85300-electrolyzer-issues/#findComment-983055 Share on other sites More sharing options...
Moggles Posted December 10, 2017 Share Posted December 10, 2017 I had a look at the save. It's not over pressure and I couldn't see any obvious issues. I'm puzzled. Yesterday I had my oil plumbing glitch out on me and had to deconstruct some pipes and bridges then rebuild to get it flowing again. It might be a similar issue. Link to comment https://forums.kleientertainment.com/forums/topic/85300-electrolyzer-issues/#findComment-983062 Share on other sites More sharing options...
TheScaryOne Posted December 10, 2017 Share Posted December 10, 2017 I had one that wouldn't turn on day before yesterday no matter what I did, wound up deconstructing it and reconstructing and it started working. Link to comment https://forums.kleientertainment.com/forums/topic/85300-electrolyzer-issues/#findComment-983118 Share on other sites More sharing options...
Oozinator Posted December 10, 2017 Share Posted December 10, 2017 Report it as bug. It was a bug before the germs update (so far i know). Link to comment https://forums.kleientertainment.com/forums/topic/85300-electrolyzer-issues/#findComment-983119 Share on other sites More sharing options...
GuyPerfect Posted December 10, 2017 Share Posted December 10, 2017 A section of Automation Wire hasn't been built because the ladder is too high off the ground. Heh. Link to comment https://forums.kleientertainment.com/forums/topic/85300-electrolyzer-issues/#findComment-983155 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.