Coolen Posted January 15, 2021 Share Posted January 15, 2021 If I read the information well, then 1 electrolyser should be able to feed 1 hydrogen generator. But in my setup, not even 3 can feed 2 hydrogen generators, the amount of gas is getting lower. I hope someone can tell me what I am doing wrong. Link to comment https://forums.kleientertainment.com/forums/topic/126156-hydrogen-generator/ Share on other sites More sharing options...
catrue Posted January 15, 2021 Share Posted January 15, 2021 Well, firstly, your electrolyzer does not work all the time due to overload from the amount of surrounding gas. this is the reason for underproduction. When using a loin lyser, there is enough hydrogen to operate more than one hydrogen generator. just build an effective lyser and the useful ratio will increase. As for hydrogen and oxygen. Link to comment https://forums.kleientertainment.com/forums/topic/126156-hydrogen-generator/#findComment-1417058 Share on other sites More sharing options...
Coolen Posted January 15, 2021 Author Share Posted January 15, 2021 so If I put in more pomps en filters, my setup could work? Link to comment https://forums.kleientertainment.com/forums/topic/126156-hydrogen-generator/#findComment-1417071 Share on other sites More sharing options...
Soulwind Posted January 15, 2021 Share Posted January 15, 2021 You need two pumps per electrolyzer to keep the pressures from rising to shutoff levels. I typically use 2 1/2 pumps with the "half" pump built to take care of hydrogen (meaning 1 h2 pump per two lyzers). You should also probably look into the various methods of gas separation as filters are pretty power hungry. Link to comment https://forums.kleientertainment.com/forums/topic/126156-hydrogen-generator/#findComment-1417085 Share on other sites More sharing options...
Coolen Posted January 15, 2021 Author Share Posted January 15, 2021 Ok I changed the setup to this and this works much better thank you 18 minutes ago, Soulwind said: You need two pumps per electrolyzer to keep the pressures from rising to shutoff levels. I typically use 2 1/2 pumps with the "half" pump built to take care of hydrogen (meaning 1 h2 pump per two lyzers). You should also probably look into the various methods of gas separation as filters are pretty power hungry. Yes I can see, it uses a lot of power. I will look for another way to separate the gas, I did not yet researched everything. But I will take a look at that. Edit: The setup isn't that good, after a few minutes all the oxygen pipes are blocked. Link to comment https://forums.kleientertainment.com/forums/topic/126156-hydrogen-generator/#findComment-1417087 Share on other sites More sharing options...
ghkbrew Posted January 16, 2021 Share Posted January 16, 2021 2 hours ago, Coolen said: The setup isn't that good, after a few minutes all the oxygen pipes are blocked. Because your vents are over pressure, because you've fully oxygenated your base, because you're making more O2 than you're using. That's good, that's the goal. Link to comment https://forums.kleientertainment.com/forums/topic/126156-hydrogen-generator/#findComment-1417152 Share on other sites More sharing options...
he77789 Posted January 16, 2021 Share Posted January 16, 2021 4 hours ago, Coolen said: Yes I can see, it uses a lot of power. I will look for another way to separate the gas, I did not yet researched everything. But I will take a look at that. You actually only need 1 filter per 2 pumps. Or mechanical filters. Link to comment https://forums.kleientertainment.com/forums/topic/126156-hydrogen-generator/#findComment-1417173 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.