Jump to content

How to clean water from germs in large quantities - any idea?


Recommended Posts

On 27/12/2018 at 6:46 PM, ONIfreak said:

Yes. Freezing will be costly. At the moment i build reservoirs inside that pool so at leas some water will get bonus "die on solid". I'm thinking to multiply this setup and try to simplify it so i can do the same using 4 pumps at once. But there is no chlorine geyser on map XD

You can fill a room with chlorine by putting bleach stone into a container and letting it sublimate into the room.

Make a basin.

 

Put a set of doors halfway down from side to side.

 

Use a Memory toggle, S linked to a Hydro Sensor detecting the half under the doors is full and link a hydro sensor that detect the half is empty to R. Link up the Memory Toggles output to a not gate and then have them control the doors.

 

Link a Germ Sensor to a Pump so it starts pumping when there is zero germs.

 

Heat/Cool the water as needed.

 

The container will keep getting filled in the other half, while it waits for the bottom half to finish killing germs and emptying.

14 hours ago, Taisong said:

This is actually an exploit.

 

If your water is contaminated with food poisoning, you can pour some slimelung-contaminated water so all of the food poisoning germs can disappear.

This happens because 2 germs are not allowed to be present at the same time in ANY materials.

Is slimelung can exist in water or not anymore?

4 hours ago, ONIfreak said:

Is slimelung can exist in water or not anymore?

Two ways to get slimelung in PW

First is to use distillers on slime with slimelung, the germs will pass on to the algae and PW

Second is with sinks or wash basins, dupes covered in slimelung germs will pass on the germs into PW as they wash their hands.

Archived

This topic is now archived and is closed to further replies.

Please be aware that the content of this thread may be outdated and no longer applicable.

×
  • Create New...