travaldofan Posted March 1, 2018 Share Posted March 1, 2018 I saw this design in Lifegrowski stream, gas valve set to 1g/s, he said it delivers big packs, but somehow not working. Is there any other ways? Thank you! Kabrude and Avc15 0W PACKET STACKER it will deliver 1000g but still 500g/s Link to comment Share on other sites More sharing options...
Kabrute Posted March 1, 2018 Share Posted March 1, 2018 that is a mechanical filter not a packet stacker I would put 2 pumps in that room, 1 direct to the line the other bridged into the line. This should put a constant 1k of nat gas into the line... Link to comment Share on other sites More sharing options...
Soulwind Posted March 2, 2018 Share Posted March 2, 2018 Directly under the geyser in an insulated room...I give it about a dozen cycles before the pump break s from the heat Link to comment Share on other sites More sharing options...
travaldofan Posted March 2, 2018 Author Share Posted March 2, 2018 2 hours ago, Kabrute said: that is a mechanical filter not a packet stacker I would put 2 pumps in that room, 1 direct to the line the other bridged into the line. This should put a constant 1k of nat gas into the line... Oh, mechanical filter WOW, so there is no way to deliver big packs without more pumps? i am not sure but can gas bridge pack them up? Link to comment Share on other sites More sharing options...
avc15 Posted March 2, 2018 Share Posted March 2, 2018 you can use a bridge to make a single gas pump deliver full packets, but you'll get half as many packets. Look for the thing Kabrute mentioned, "packet stacker" One possible use is to limit the duty cycle of machines that operate on packets of gas and/or liquid - ie, it can reduce the runtime of a thermo regulator by half if you're only using one pump. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.