wenxuan2 Posted December 29, 2017 Share Posted December 29, 2017 Hey im new here. Just came in to ask some help. I built this natural gas generator from the natural gas geyser. It worked for a little while but then the gas pump in the natural gas geyser area stop pumping due to pipe blocked. But i cant seem to find the problem in this area. Can someone help? Would greatly appreciate it Link to comment https://forums.kleientertainment.com/forums/topic/85908-need-help-gas-pipe-blocked/ Share on other sites More sharing options...
Oozinator Posted December 29, 2017 Share Posted December 29, 2017 4 hours ago, wenxuan2 said: HWould greatly appreciate it Hard to see for me, but it could be, that the output from the bridge, at the line where the right filter has it's output, is blocking transfer. Try it with one filter/one pump first.(disconnect). When you have "dancing" packets somewhere in your line, it's a hint. You have two filters, one for co²/po²? I see a packet of po² in your line, perhaps that is blocking your co² filter? When you want to filter both gasses, decon one pump and connect the output(not the filterline, where you choose gas) of co² filter to input of po² filter. Link to comment https://forums.kleientertainment.com/forums/topic/85908-need-help-gas-pipe-blocked/#findComment-988223 Share on other sites More sharing options...
jiaonichifanla Posted December 29, 2017 Share Posted December 29, 2017 Can you upload your save files? Hard to see for me. Link to comment https://forums.kleientertainment.com/forums/topic/85908-need-help-gas-pipe-blocked/#findComment-988227 Share on other sites More sharing options...
Neotix Posted December 29, 2017 Share Posted December 29, 2017 Pipes connections looks good. Do you have power in that filters? Link to comment https://forums.kleientertainment.com/forums/topic/85908-need-help-gas-pipe-blocked/#findComment-988251 Share on other sites More sharing options...
Saturnus Posted December 29, 2017 Share Posted December 29, 2017 7 hours ago, wenxuan2 said: Hey im new here. Just came in to ask some help. I built this natural gas generator from the natural gas geyser. It worked for a little while but then the gas pump in the natural gas geyser area stop pumping due to pipe blocked. But i cant seem to find the problem in this area. Can someone help? Would greatly appreciate it Machine exhausts should be merged into to a gas line. Most often they block the pipe if you try to run it across them like you have. Link to comment https://forums.kleientertainment.com/forums/topic/85908-need-help-gas-pipe-blocked/#findComment-988253 Share on other sites More sharing options...
Pex Posted December 29, 2017 Share Posted December 29, 2017 As I can see, you cross-over your filter outputs. (green output junctions) Outputs should be separated. You can cross-over inputs, not outputs. Link to comment https://forums.kleientertainment.com/forums/topic/85908-need-help-gas-pipe-blocked/#findComment-988352 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.