Max_MSC Posted December 7, 2017 Share Posted December 7, 2017 Hydroponic farms with pinches are not irrigated, but I conducted pipes with dirty water. What could be the problem? Link to comment Share on other sites More sharing options...
TheScaryOne Posted December 7, 2017 Share Posted December 7, 2017 The game doesn't like having a bunch of feeds on the "main line" afaik, build a pipe manifold and then have each feed be a separate branch off. Link to comment Share on other sites More sharing options...
Max_MSC Posted December 8, 2017 Author Share Posted December 8, 2017 @TheScaryOne I tried to lay the main channel from below and from there in each farm to fill the water. This has not changed anything. Can you give examples of the correct location of pipes? Link to comment Share on other sites More sharing options...
BlueLance Posted December 8, 2017 Share Posted December 8, 2017 From what I am awayre its best to have two lengths of pipe going into each hydroponic planter Sorry for it being on excel I am busy haha, the Yellow is your planters and the green is the pipes, there does not have to be plank spaces I ust did this so you can see, Just be aware that your packets will split as long as there is water in the pipe already, if the 1st farm uses up its water it will most likely request another before the one at the end gets a packet. Link to comment Share on other sites More sharing options...
Mjello Posted December 9, 2017 Share Posted December 9, 2017 Check if you have other fluids in the farms. If you do then empty them. I run pipes straight through my farms and they work just fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.