doomeris Posted September 3, 2017 Share Posted September 3, 2017 Rather than keeping your power switches near the thing you want to turn on/ turn off when it reaches temp/pressure etc. Make them instead markable what building you want to turn off when it reaches x amount of pressure/temperature. So for example i've got a temp switch near my power transformer and i want it to turn off when i reach 50 C i can place the temp switch anywhere i want, once placed you have to mark & drag what building needs to be turned off for it to work. And make it a green color which buildings will be affected.. Now that would change alot! Link to comment Share on other sites More sharing options...
Masterpintsman Posted September 3, 2017 Share Posted September 3, 2017 Your idea could be cool in case we get another wiring overlay for data/sensors, so a switch could be wired to a feeler item (that can be located in areas that are not that healthy to visit) while the switch itself could be outside (for the dulicants to acces). Otherwise it dosn't make sense. As a sidenote: Putting '*REALLY COOL*' in a topic title usually is the indication that the contents of the first post are not. Link to comment Share on other sites More sharing options...
Michi01 Posted September 3, 2017 Share Posted September 3, 2017 I'm hoping that something like this will be added: Link to comment Share on other sites More sharing options...
Botaxalim Posted September 4, 2017 Share Posted September 4, 2017 I usually using workaround solution , moving the switch using longer cable wire maze Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.