notag Posted August 31, 2019 Share Posted August 31, 2019 So i build my first loop and I'm not sure whats broken about it. For some reason the automation is sending super cold polluted water back to the aquatuner and i'm not sure why. Automation https://steamcommunity.com/id/TesticularTorsion/screenshots/ Piping https://steamcommunity.com/id/TesticularTorsion/screenshots/ What am I doing wrong? Link to comment Share on other sites More sharing options...
PhailRaptor Posted September 1, 2019 Share Posted September 1, 2019 Iirc sensor/shutoff filters must always have the shutoff entry immediately after the sensor. If you move the lower shutoff up 1 tile it should work correctly. Link to comment Share on other sites More sharing options...
Coolthulhu Posted September 1, 2019 Share Posted September 1, 2019 Terrifying steam name You're using the shutoffs wrong: you're putting them after the split, but you need to use a shutoff AS a split. That is, your pipe has to be a straight line, with one shutoff grabbing packets away if they're too cold, or ignoring them and letting them go past it if they are hot. Use bridges or valves to ensure it always goes in the correct direction. The shutoff input is always active for purposes of directing liquid. So, in your case, the split sends liquid to shutoff even if it is disabled. Enabling it only makes it teleport packets from its input to its output. Link to comment Share on other sites More sharing options...
ONIfreak Posted September 1, 2019 Share Posted September 1, 2019 Hardcore steam name. I woild suggest attaching screenshots to post instead of giving link to steam. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.