ChainImpact Posted June 30, 2018 Share Posted June 30, 2018 I still haven't even hit the ceiling yet. Good Start.sav Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/ Share on other sites More sharing options...
Oozinator Posted June 30, 2018 Share Posted June 30, 2018 Why is the orescrubber washbin invasion there? (could be removed, washbins at toilets are enough). Your steam geyser is cooking everything. Your Mushroom thing is lost due heat. This is messed up, if you ask me. So many basics missing.. Example: Where your ice melts, keep ground dry, use meshtiles, when dupes leaving comfort zone(hypothermia). Your piping is creative, but that's all about it.. ^^ Ask specific stuff to improve.. Heat management is important (before!!!!!!!!!23213312133) opening an geyser/volcano thing.. Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1057789 Share on other sites More sharing options...
Yoma_Nosme Posted June 30, 2018 Share Posted June 30, 2018 Please add some screenshots if you can. I would like to share my "expertise" *lol but I'm on my phone until later this evening. Cheers. Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1057792 Share on other sites More sharing options...
leoroy Posted June 30, 2018 Share Posted June 30, 2018 You should have kept your base waaaaaaay smaller if you ask me : you could have enclosed it to keep the temps nice and to easily manage gases. I don't understand from where is that Natural gas? Enclosing your base should have helped keeping CO2 at the bottom, giving you a perfect place to grow your mushrooms. Your attempt to remove the NG from your mushrooms farm is lost : you dump the NG almost at the same place. Your piping is heating your base too, I use insulated pipes even for 29 degrees water / gases. If I were you, I would rapidly enclose the middle of the base, collect the wheez out of the base and use them to cool only the middle of the base, then pump CO2 in a chamber below the main area to grow mush and cool them with some wheez. Once done, rework your oxygen generation (SPOM build should be nice) and worry about your steam geysers. Maybe only one of the two is enough. If it is, only try cooling one. You just need to achieve 95C degrees water and can use it with insulated pipes for oxygen production. Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1057809 Share on other sites More sharing options...
ChainImpact Posted June 30, 2018 Author Share Posted June 30, 2018 oh wow, yeah I guess I need to hit up those issues first eh. but mech tiles in icy areas, I don't know why I didn't think of that. not sure how to deal with the heat. the Natural gas just was in a pocket and I let it out. but I guess you are right.. I will try to dumb the Natural gas somewhere else. There is no way to screen shot this base and get the full situation. There used to be a huge slime area and I cleaned it out. the washbin and ore scrubber wasn't hurting anyone, plus it is hard to contain all the chlorine so I left it there as a random cleaning station. all this was done without using debug mode, so that is the only thing I am proud about this file. Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1057913 Share on other sites More sharing options...
ChainImpact Posted June 30, 2018 Author Share Posted June 30, 2018 I have made minor tweaks according to what you guys said. I am not sure how to deal with the heat problem. Not so good start.sav Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1057980 Share on other sites More sharing options...
Oozinator Posted June 30, 2018 Share Posted June 30, 2018 31 minutes ago, ChainImpact said: ...I am not sure how to deal with the heat problem... Some suggestions.. Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1057985 Share on other sites More sharing options...
TOOK14 Posted June 30, 2018 Share Posted June 30, 2018 You can use alt+s to zoom out as far as you want to screenshot the whole map, or just upload several screenshots. 3 hours ago, ChainImpact said: There is no way to screen shot this base and get the full situation. Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1057989 Share on other sites More sharing options...
ChainImpact Posted July 1, 2018 Author Share Posted July 1, 2018 and while yes, that link is helpful with dealing with heat is helpful, at the same time it isn't. I am looking for more specific answers. Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1058148 Share on other sites More sharing options...
ChainImpact Posted July 1, 2018 Author Share Posted July 1, 2018 that heat deletion link is outdated and it doesn't really work. but after digging really hard because heat is becoming the biggest issue now, i finally found an anti heat nullifer Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1058157 Share on other sites More sharing options...
ChainImpact Posted July 1, 2018 Author Share Posted July 1, 2018 could someone open my file and show me how you would transfer heat and deliver cold stuff? Hot Death.sav Link to comment https://forums.kleientertainment.com/forums/topic/92870-can-anyone-help-me-improve-this-setup-im-on-day-400/#findComment-1058186 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.