Jump to content

100% efficiency self filtered eletrolyzerz


Recommended Posts

Spoiler

 

So this glitch is not new it’s been around for awhile it’s the over pressuring glitch using water.The way it is done in the picture is using less than 200 kg of pw on the bottom of the eletrolyzer and less than 200 kg of regular water on the top.The part with the airflow is set up in a way that hydrogen is on one side and oxygen on the other this also makes the eletrolyzer lossless for hydrogen and oxygen because the gassed can always find a tile to go to.

I would like to say that I am not the founder of this glitch and the picture is from a person by the name Gemelostro because ONI is not on consoles yet.

502E4C5B-8006-4F17-A4F5-5E7ADC9413B5.jpeg

29 minutes ago, BT_20 said:

Sorry I accidentally uploaded the title before I made the rest of the post.

Ahh ok, no problem :)

7 minutes ago, GreatGameDota said:

I would like to say that I am not the founder of this glitch and the picture is from a person by the name Gemelostro because ONI is not on consoles yet.

502E4C5B-8006-4F17-A4F5-5E7ADC9413B5.jpeg

Also I just wanted to point out that this setup is actually bugged and Hydrogen is actually supposed to come out through the left gas perm tile and oxygen out the right. Like this:

Credit to @PVD for the image.

2E0CAB1B-8F1F-4030-8129-36B3FF87CCFF-625-000001A3E7E2BBBE.png

Well is it like this always I would think the side with hydrogen or oxygen is determined by the first pump from the eletrolyzer and then since only one gas can occupy a tile that’s why it’s self filtered.Correct me if I’m wrong 

The side where the electrolyzer dumps hydrogen and oxygen doesn't matter.  The machine just tries to create a bubble of hydrogen and oxygen near itself, the gas physics/mechanics of ONI then try to place said bubbles in locations that..

 

A) Have the least pressure and preferably... 

B) Already have the same gas

 

It doesn't like to push gases out of the way if it can help it.  Getting one of these flooded electrolyzers to work like this might take a little time as it tends to switch which spot to put the hydrogen and oxygen.  The trick is to force a tile of hydrogen to sit in one of those gaps and not float away so the machine just places its hydrogen always on that tile.

Archived

This topic is now archived and is closed to further replies.

Please be aware that the content of this thread may be outdated and no longer applicable.

×
  • Create New...