Power not powering?

[Frustrated]

This is a bit odd.

Spoiler

This was part of a little experiment of mine.

The red-circled transformer is connected through the battery to a pair of active hydrogen generators and is fully active and powering up the nearby atmosuit docks.  The blue-circled transformer is currently trying (and failing) to power the exosuit forge.  The transformer is connected through a battery to this transformer...

Spoiler

...also circled in blue.  The incoming power circuit is from a battery connected to 3 steam turbines.  As you can see, the inbound is active and powering, the outbound is inactive.  I'm trying to figure out why this isn't working.  There are no breaks in the connection between the blue-circled transformers.

Edited Wednesday at 03:39 PM by Frustrated

[MinhPham]

The transformer is either disabled by an automation wire, or by ... you, because it hold no charge 

In the worst case you will need to rebuild it.

[Frustrated]

I just checked.  It was a stray automation wire from the battery.  I rewired that line...but the transformer was still inactive, so I had to connect it to a signal switch.  Annoying...but resolved.

[asurendra]

32 minutes ago, Frustrated said:

I just checked.  It was a stray automation wire from the battery.  I rewired that line...but the transformer was still inactive, so I had to connect it to a signal switch.  Annoying...but resolved.

You need to destroy automation wire in transformer active cell. When automation wire doesnt connected to anything it sends red signal by itself. Destroy it so there wont be any automation wire, and it will work