Solark Posted March 23, 2020 Share Posted March 23, 2020 For the past few cycles, I've been having strange freezes every half-second to two seconds, reminiscent of the small lag spike during an autosave, but much more frequent. I've looked all over the place trying to figure out what's wrong, and although I'm not entirely certain, I think it's the fault of extensive piping. I looked at my performance (no bottlenecks), my mods (cleaning helped a slight bit, read further), and I stumbled onto the idea of my terribly messy liquid pipe network being the culprit. I loaded an older save in which there was no piping at all, with all the same mods from this save, and found no performance issues whatsoever. Again, I'm not entirely sure that it's the pipe network's fault, but it seems the most likely culprit. Is there anything I can do? The Space Trainwreck.sav Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/ Share on other sites More sharing options...
Fleetfeet Posted March 23, 2020 Share Posted March 23, 2020 If you're seeing stuttering of flow, know that the little blobs moving down the pipes are purely visual, and that purely visual effect is interrupted by dupes constructing or deconstructing pipes anywhere. If that's what your lag looks like, worry not - your liquids are flowing just fine. Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1318340 Share on other sites More sharing options...
Xenotrix Posted March 23, 2020 Share Posted March 23, 2020 Try disabling the timelapse, it is created every cycle and causes a lag. Spoiler No other lags for me with your save. Only during on autosave and timelaps. Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1318351 Share on other sites More sharing options...
Degaliuss Posted March 23, 2020 Share Posted March 23, 2020 I have the same exact problem Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1318404 Share on other sites More sharing options...
PIRATE D KING Posted March 24, 2020 Share Posted March 24, 2020 18 hours ago, Xenotrix said: Try disabling the timelapse, it is created every cycle and causes a lag. Hide contents No other lags for me with your save. Only during on autosave and timelaps. what does that function do? is that the quality of the image created along the save file? Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1318611 Share on other sites More sharing options...
Xenotrix Posted March 24, 2020 Share Posted March 24, 2020 3 hours ago, PIRATE D KING said: what does that function do? is that the quality of the image created along the save file? This function used in colony summary for show mini-clip for progress your colony. Spoiler Every cycles at noon game do screenshot entire map and place PNG image to folder "c:\Users\<name account>\Documents\Klei\OxygenNotIncluded\RetiredColonies\<name colony>" Settings set quality of this image. On my weak hardware this function causes 1-2 second lag like autosave. So.. i just shut off this function always on start new game, I don't care about timelapse, not used. Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1318662 Share on other sites More sharing options...
Degaliuss Posted March 24, 2020 Share Posted March 24, 2020 I had exactly the same problem you described but the developer found out the cause and I fixed it. Check my forum post here in general discussion, the solution worked for me. Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1318704 Share on other sites More sharing options...
Solark Posted March 25, 2020 Author Share Posted March 25, 2020 On 3/22/2020 at 11:13 PM, Fleetfeet said: If you're seeing stuttering of flow, know that the little blobs moving down the pipes are purely visual, and that purely visual effect is interrupted by dupes constructing or deconstructing pipes anywhere. If that's what your lag looks like, worry not - your liquids are flowing just fine. That has nothing to do with my issue, I'm having in game performance drops every half second, not minor OCD at pipe blobs. On 3/23/2020 at 12:37 AM, Xenotrix said: Try disabling the timelapse, it is created every cycle and causes a lag. Reveal hidden contents No other lags for me with your save. Only during on autosave and timelaps. I did this and suffered through an entire cycle to see if the lag would ease up once it was no longer recording a timelapse, which it unfortunately did not. 16 hours ago, Degaliuss said: I had exactly the same problem you described but the developer found out the cause and I fixed it. Check my forum post here in general discussion, the solution worked for me. Wow, one ladder into a caustic biome and bam, all lag gone instantly. Thank you so much, it was starting to get really bad. Can't wait for an explanation on how the hell an achievement was causing lag... Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1318896 Share on other sites More sharing options...
KittenIsAGeek Posted March 25, 2020 Share Posted March 25, 2020 On 3/22/2020 at 10:35 PM, Solark said: For the past few cycles, I've been having strange freezes every half-second to two seconds, reminiscent of the small lag spike during an autosave, but much more frequent. I've looked all over the place trying to figure out what's wrong, and although I'm not entirely certain, I think it's the fault of extensive piping. I looked at my performance (no bottlenecks), my mods (cleaning helped a slight bit, read further), and I stumbled onto the idea of my terribly messy liquid pipe network being the culprit. I loaded an older save in which there was no piping at all, with all the same mods from this save, and found no performance issues whatsoever. Again, I'm not entirely sure that it's the pipe network's fault, but it seems the most likely culprit. Is there anything I can do? The Space Trainwreck.sav So I went to load your save... I didn't observe any strange lagginess, so it might possibly be MOD related. Also, you had dupes building piping. When there's a lot of piping, or there's a lot of confusing paths, then there can be lag each time a segment gets built as the game rechecks the possible paths for the liquid to take through the pipes. Anyway, on to the actual piping and problems: First, you have several areas that are something like this: Spoiler This is a loop and can result in some confusion. Packets of liquid don't know which way to go. In the case of the output from your water sieve, you can change it in two ways: Spoiler This will split output so that one packet goes across the bridge, and the other goes up to the toilets. Spoiler This method will prioritize output across the bridge. Once that direction is full, liquid packets will go through the pipe leading up. Anyway, other than the occasional odd loop, there's nothing with your piping that could be causing a problem. Even those loops really won't be that big of a deal -- as long as you fix them at some point and don't make more. So, I'm guessing that perhaps it was something MOD related and that you were building pipe segments. I'm not sure what all those mods do, but if one of them is broken, it could add a lot of extra lag. Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1319093 Share on other sites More sharing options...
Solark Posted March 26, 2020 Author Share Posted March 26, 2020 23 hours ago, KittenIsAGeek said: So I went to load your save... I didn't observe any strange lagginess, so it might possibly be MOD related. Also, you had dupes building piping. When there's a lot of piping, or there's a lot of confusing paths, then there can be lag each time a segment gets built as the game rechecks the possible paths for the liquid to take through the pipes. Anyway, on to the actual piping and problems: First, you have several areas that are something like this: Hide contents This is a loop and can result in some confusion. Packets of liquid don't know which way to go. In the case of the output from your water sieve, you can change it in two ways: Reveal hidden contents This will split output so that one packet goes across the bridge, and the other goes up to the toilets. Reveal hidden contents This method will prioritize output across the bridge. Once that direction is full, liquid packets will go through the pipe leading up. Anyway, other than the occasional odd loop, there's nothing with your piping that could be causing a problem. Even those loops really won't be that big of a deal -- as long as you fix them at some point and don't make more. So, I'm guessing that perhaps it was something MOD related and that you were building pipe segments. I'm not sure what all those mods do, but if one of them is broken, it could add a lot of extra lag. Wow, thank you for all that help, but... I've already solved the issue. I was missing an achievement, which was causing the lag somehow. Still, I will be using those tips you've outlined! Link to comment https://forums.kleientertainment.com/forums/topic/116680-help-with-piping-lag/#findComment-1319451 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.