Splitting power

[jfc]

My base is not too far from my power plant system and my base is divided into 2 circuits and there's lots of stuff connected to each. My question is, how can I improve my system to reduce the max wattage on it for security reasons?

 

Que

[Neotuck]

You might need to elaborate on "security reasons". Other than that it looks fine.  I'm assuming the smart battery on the bottom is automating all the generators?

[SharraShimada]

Security regarding powerline-overloading? Just make sure, the wires are never overloadet due to many things attached to. The overlay tells you the current wattage, and the max wattage connected to. Thats pretty easy.

If you want to relay power from one grid to another, if one has sureplus, and the other a shortage, you can build a single smart battery, controling a power-shutoff via automation. If the battery is drained below X% the power-shutoff opens, and the surplus network will feed the shortage. When the shortage is over, the smart-battery will cut the powerline again, and everythin is seperated.

[Frag31337]

I just give u the way

For long distance periodical hight wattage usage.

Generation zone

 

Then transportation with metal wire(2kW) to usage zone (about 6kW max, Bunkers and scaners)

And that how i split power from 2kW to 6kW(=

Main idea is that i need no use 2kW power every second but some time(METEORSCOOOOMING) i need to power 30 +doors in one second(i`m so lazy to create smart door opening system).

In that moment all batteries are full of charge and they give power to doors. When charge in battery low(lower than 90%) - it connect to input wire and get energy. Automatization guaranty that in one moment it will be just one output line.

 

I use such splitters in many places. For example Rest Room use 4kW+ of energy, But such system give me right to use just one  Wire in input there too.