greggbert Posted February 16, 2018 Share Posted February 16, 2018 OP:> You joined your two circuits together losing the benefit of the transformers. Each transformer should feed to only one circuit. Just make a break between the seconnd floor (from the bottom) and the next one up (delete the wire on the middle portion of the ladder) and you should be good. Also your hamster wheel is not connected. On 2/14/2018 at 7:58 PM, Izzy248 said: The problem existed before that though. I just recently added the extra transformer outside the kitchen because I thought it would ease the stress if there were 2 incoming power sources contributing Broke it up and the problem still seems to persist. It actually increases the stress by allowing a max of 2000 watts on your circuit. Link to comment https://forums.kleientertainment.com/forums/topic/87624-what-is-wrong-with-this-power-setup/page/2/#findComment-1005133 Share on other sites More sharing options...
Izzy248 Posted February 16, 2018 Author Share Posted February 16, 2018 9 minutes ago, greggbert said: OP:> You joined your two circuits together losing the benefit of the transformers. Each transformer should feed to only one circuit. Just make a break between the seconnd floor (from the bottom) and the next one up (delete the wire on the middle portion of the ladder) and you should be good. Also your hamster wheel is not connected. It actually increases the stress by allowing a max of 2000 watts on your circuit. I think you are referring to the old, original issue... Link to comment https://forums.kleientertainment.com/forums/topic/87624-what-is-wrong-with-this-power-setup/page/2/#findComment-1005138 Share on other sites More sharing options...
PhailRaptor Posted February 16, 2018 Share Posted February 16, 2018 17 minutes ago, greggbert said: It actually increases the stress by allowing a max of 2000 watts on your circuit. Not exactly. A Transformer will "update" the grid power status 4 times per second. Each of those 4 times per second, it will supply up to it's limit of 1 kW. So a single Transformer can supply a circuit of up to 4 kW before bottlenecking, as long as no single device consumes more than 1 kW. If a single device does use more than 1 kW, you will need a Battery of some description on the circuit to achieve the same effect. Link to comment https://forums.kleientertainment.com/forums/topic/87624-what-is-wrong-with-this-power-setup/page/2/#findComment-1005148 Share on other sites More sharing options...
Izzy248 Posted February 16, 2018 Author Share Posted February 16, 2018 This one is truly peculiar...as you can see there is no enemy being outputted at all yet one of my wires is in "Surplus" even though it isnt powering anything, but the other is "Strained" even though it also isnt powering anything. Link to comment https://forums.kleientertainment.com/forums/topic/87624-what-is-wrong-with-this-power-setup/page/2/#findComment-1005165 Share on other sites More sharing options...
Ppere Posted February 17, 2018 Share Posted February 17, 2018 On 15/2/2018 at 4:31 AM, Lifegrow said: Entonces no estás usando transformadores en todo su potencial. Sin la batería en el lado del consumidor del transformador, te cuesta mucho ... Aquí hay algunos ejemplos antiguos: Power gen: Siga el fuerte cable de vatios a los transformadores: tenga en cuenta las baterías de cada línea de consumo, pero también una batería en la línea principal de vatios pesados. Las baterías del consumidor siempre se llenarán antes que el banco de baterías principal: Donde sea que vea cables de vatios pesados, ya sea que conduzca a transformadores, generador de energía o a mi banco principal de baterías: I think I fell in love with this base Link to comment https://forums.kleientertainment.com/forums/topic/87624-what-is-wrong-with-this-power-setup/page/2/#findComment-1005389 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.