MythN7 Posted July 3, 2017 Share Posted July 3, 2017 I have noticed if you are using pipe bridge, the water outlet can end up submerged but yet wont stop dripping water, not sure if its cause a bridge is on the line what so ever from the next inline machine, or if its a certain pipe links away. I noticed this cause i use an outlet and use the auto pipe blocked trait of the outlet to not over flow my air lock hatches. but when using the bridge, it never seems to stop dripping. Edit: I was setting up an example to show screenshot, and i guess it does stop, only seems to have to be 1 tile lower than normal, mabye cause of the fact the bridge can push through 10kg of water forcing the output to be to much. Link to comment Share on other sites More sharing options...
Kasuha Posted July 3, 2017 Share Posted July 3, 2017 That happens in polluted water, the vent blocks when pressure is over 1000 kg per tile but polluted water has only 800 kg per tile. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.