vonVile Posted March 22, 2017 Share Posted March 22, 2017 When the Thermal Update updated today I tied to hunt down the problem of why my Biodistiller and Water Pumps weren't getting power even though connected and worked before. I discovered lines to those machines were still Electrical and not Heavi-Duty. The problem was I had to manually double check each tile by reading the description of each one to make sure I didn't miss one. There needs to be a way to visually see the difference between the two types of wire in Overlay mode. This also could be done for gas and water pipes. Link to comment Share on other sites More sharing options...
scientas Posted March 22, 2017 Share Posted March 22, 2017 Excellent idea. Showing one as red and one as yellow (or whatever color scheme) makes perfect sense. Link to comment Share on other sites More sharing options...
Kasuha Posted March 22, 2017 Share Posted March 22, 2017 If you have them combined on one wire, you can just put about 850 W load on it and the standard wire will turn yellow in wire overlay. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.