Showmzzz Posted December 16, 2020 Share Posted December 16, 2020 That pipe keeps breaking and i cant figure out why any help would be greatly appreciated thanks a lot. Link to comment Share on other sites More sharing options...
pether Posted December 16, 2020 Share Posted December 16, 2020 Probably it is too hot and either pipe melts or the liquid inside evaporates. Link to comment Share on other sites More sharing options...
catrue Posted December 17, 2020 Share Posted December 17, 2020 Your oil turns into petrol right in the pipe, this system needs to be improved for stable operation. Change the part of the pipe that goes to the drain, for example, with an ordinary one from obsidian so that the temperature of the oil passing through it approaches 380 degrees Celsius. Here is my building. Sorry for the inaccurate translation. In addition to the finished oil, such a system also provides a sea of energy and fully pays for the costs. The oil outlet temperature of 20-30 degrees is quite comfortable for the settlement. It works stably for about 10-15 cycles, depending on which range of output temperatures is set. After the distillation is stopped by automatic equipment and about 7 cycles, 4 out of 5 turbines operate on the accumulated heat, then then it turns on everything according to the scheme. Production of 6 tons of oil per cycle. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.