Aryel Cristiano Posted August 10, 2020 Share Posted August 10, 2020 Hi guys! My germ sensor isn't working. It just not identify germs in the pipe even if there is! Ps: the automation is working, it just not identify germs, it always show "0 germs" Link to comment https://forums.kleientertainment.com/forums/topic/120828-gas-pipe-germ-sensor-not-working/ Share on other sites More sharing options...
abud Posted August 10, 2020 Share Posted August 10, 2020 "Gas pipe germ sensor", as the name suggest, you should use this on "gas pipe", not the air. If you still confused, tell us so we can take simple pic. Link to comment https://forums.kleientertainment.com/forums/topic/120828-gas-pipe-germ-sensor-not-working/#findComment-1361583 Share on other sites More sharing options...
Aryel Cristiano Posted August 11, 2020 Author Share Posted August 11, 2020 Well, I actually feel embarased, sometimes our brain just doesn't work hahaha I though it could be put anywhere and just neede to conect the automation wire to the pipe Thanks a lot mate! Link to comment https://forums.kleientertainment.com/forums/topic/120828-gas-pipe-germ-sensor-not-working/#findComment-1361841 Share on other sites More sharing options...
Exar Posted August 18, 2020 Share Posted August 18, 2020 Sine it's related - I'm actually having problems with the pipe sensor constantly reading 28,000 germs in a room with 2Kg chlorine (freely moving) and even a gas pump circulating chlorine round the round in radiant gas pipes. Water in storage tank shows as having no germs, as does all sections of pipe containing the sieved water. Trying to de-germ P.water after sieving via liquid storage tank. P Water Source IN > Sieve > Liquid Storage (within chlorine room) > Pipe Germ Sensor > Liquid Pipe Shutoff (still in the chlorine room) > Pipe to Clean water tank OUT. Link to comment https://forums.kleientertainment.com/forums/topic/120828-gas-pipe-germ-sensor-not-working/#findComment-1363515 Share on other sites More sharing options...
Neotuck Posted August 18, 2020 Share Posted August 18, 2020 21 hours ago, Exar said: Sine it's related - I'm actually having problems with the pipe sensor constantly reading 28,000 germs in a room with 2Kg chlorine (freely moving) and even a gas pump circulating chlorine round the round in radiant gas pipes. Water in storage tank shows as having no germs, as does all sections of pipe containing the sieved water. Trying to de-germ P.water after sieving via liquid storage tank. P Water Source IN > Sieve > Liquid Storage (within chlorine room) > Pipe Germ Sensor > Liquid Pipe Shutoff (still in the chlorine room) > Pipe to Clean water tank OUT. best to kill the germs first before sieving so you don't have to deal with germs on the P dirt here's a screenshot of what I use, Automation is simple, top germ sensor opens the door disabling the reservoir when it detects germs. The BUFFER gate is set to 135s to keep the door open while germs die Bottom germ sensor controls the shutoff sending any surviving germs back to the tank (optional) Link to comment https://forums.kleientertainment.com/forums/topic/120828-gas-pipe-germ-sensor-not-working/#findComment-1363730 Share on other sites More sharing options...
Suraman Posted September 9, 2020 Share Posted September 9, 2020 Hi Neotuck, i've been trying to reproduce your setup all evening without success. Problem comes from the top Germ sensor : Send green signal above 1 Germ => The Gem sensor doesnt reset the gem count when empty and so stays on green => the door never closes back. How do you deal with this issue ? Also i dont understand how you put your buffer gate on top of the reservoir automation port. Is this setup from an older version or am i doing something wrong ? Link to comment https://forums.kleientertainment.com/forums/topic/120828-gas-pipe-germ-sensor-not-working/#findComment-1370062 Share on other sites More sharing options...
Neotuck Posted September 9, 2020 Share Posted September 9, 2020 9 hours ago, Suraman said: Send green signal above 1 Germ => The Gem sensor doesnt reset the gem count when empty and so stays on green => the door never closes back. How do you deal with this issue ? Sometimes the germ sensor gets stuck sending a green signal even when no packets of PW are present. Needs a clean source of PW to reset the sensor back to red. That's why I have showers in the loop to provide germ free PW 9 hours ago, Suraman said: Also i dont understand how you put your buffer gate on top of the reservoir automation port. Is this setup from an older version or am i doing something wrong ? Pic is from an older version, you have it right Link to comment https://forums.kleientertainment.com/forums/topic/120828-gas-pipe-germ-sensor-not-working/#findComment-1370141 Share on other sites More sharing options...
Suraman Posted September 9, 2020 Share Posted September 9, 2020 Didnt know showers provided germless PW ty Link to comment https://forums.kleientertainment.com/forums/topic/120828-gas-pipe-germ-sensor-not-working/#findComment-1370142 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.