TreeRex Posted August 30, 2019 Share Posted August 30, 2019 Pretty much want to be able to connect the tranist tube crossing tile to the bottom of a transit tube access point, effectively allowing me to make a straight up and down line of tranist tubes with access points along the length, no turns required, which would effectively allow it to act as an elevator. Link to comment Share on other sites More sharing options...
SharraShimada Posted August 30, 2019 Share Posted August 30, 2019 Hard one... Because the Access building needs to stand on 3 tiles solid. Of course you can build a tube-bridge instead, but the problem is, there has to be at least 2 tube tiles between a cross and something else, or it wont link. So a port at the bottom is out of the question. But there is a possible workaround. Someone could make the upper port two way (up and down), and there is a mod, making tubes background buildings. Unfortunately, the mod is not working well, because the tiles crossing other buildings are not passable. But i´m confidend, this could be solved. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.