UberFubarius Posted May 1, 2019 Share Posted May 1, 2019 A mechanian to bundle multiple automation wires into one wire. Currently, if you want to wire a lot of automation wires over long distance. You have to run a lot of parallel wires. At the same time, a wireless automation seems to make things a bit too trivial. I propose having a automation conduit/bus system. It consist of the following. 1. The Bus - visually like a heavy electric wire, does not intersect with automation wires. 2. Input Patch - place on top of the Bus, receives automation signal. 3. Output Patch - place on top of the Bus, emits automation signals. Defaults to Off signal. Both input and output patch can be set to a channel value between 1 and 16. Anytime an Input Patch receives an on signal, all Output patch sitting on the same Bus with the same channel emits an On signal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.