Jump to content

Dupes can't use transit tube if A to B destination tube path isn thet same material

tyraelpl

By tyraelpl

    • Branch: Live Branch Version: Windows Pending

Let's consider the most simple case: 1 transit access point and a 1 way exit, without an access point there. If the entirety of the tube (apart from crossings tiles it seems) is made from the same material a dupe sees that as a path. However if only 1 piece of tubing between entry and exit is from another material as far as dupe's pathing goes, there is no path. Likewise for when there is an access point on both ends.

For me it was mostly plastic tubes with part made of plastium thru a hot area.

I've not tested mostly plastium tubes with only part of it being plastic.

Steps to Reproduce
  1. Construct a plastic tube connection from point A to B with an access point on either just one end on both.
  2. Replace any one segment of the tube with a plastium tube segment,
  3. Watch dupe refusing to path thru this tube network; refuse to use access points.
Go to bugs

User Feedback


sakura_sk

If your tube looks like that:

image.png.b3dacb61860666304e68669416753db5.png

or that:

image.png.0344fc40e47f9ceb6b1238e43477d8b7.png

it means it's not connected. You need to drag your cursor along the line of tube like you would do on wire/pipes to make it connect

Share this comment

Link to comment
Share on other sites
tyraelpl

No, it was fully connected.The tube had full continuity, I also tested it on a tube segment i knew was fully working. It wast after material change.

Edited by tyraelpl

Share this comment

Link to comment
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...