Power overloading

[aessilva]

Okay so I am not really good with power yet, in fact this is the first time I have gotten to it. So if someone would be so kind as to point out my error in this set up it would be appreciated. I have tried reversing the transformer. I also made sure it was under 1000w but wires still fry maybe I am using a wrong material for the wires? Thanks again for the help. 

[Christophlette]

In the screenshot you have connected both ends of the power transformer together. So your power generators are connected to your electrolysers.

To fix this you must connect the heavy wires on the upper end of the power transformer. Then make a new line coming from the bottom end of the power transformer to your electrolysers. Look at the arrows on the transformer to help you.

Another tip though you may need that much electrolysers : On electrolysers can produce 888g of oxygen per second. And one dupe consume 100g per second (without special trait affecting that). So you can theoretically feed 8 dupes per electrolysers. It's closer to 6 and it depends how much your electrolyser can run (they overpressure really fast).

And the last tip : Hydrogen go upward and oxygen will be at the bottom of the room if you only have those two gas in the room. You can use this property to put pumps at the right spot to get only oxygen or only hydrogen with a bit of automation. I'll let you tinker with that if you want to make your own build

[aessilva]

Thanks so much Ill give that a shot and see if it works.