Mars0116 Posted June 9, 2017 Share Posted June 9, 2017 So I understand you can't run over 1000kj in one normal power line. I carefully design everything, with 4 big battery and each one of them was connected to a certain part of my machine. I make sure that every normal power line won't run more then 1000kj of power through it, and then I connect all 4 battery with that huge power line. 4 of my minion run to created power and in addition, there is a hydr generator pumping power into the battery. But I still got power over load. Hopefully the pic I uploaded is clear enough. Sorry about the language pack. Link to comment Share on other sites More sharing options...
Momotall Posted June 9, 2017 Share Posted June 9, 2017 这个版本的电力规则就是所有通过导线连接起来的电池和用电器算一个回路，只要回路中用电器总功率超了1KW，就算用了一部分高压线也还是会过载。 解决方案就是把所有发电机和电池组用导线连接（这版本就算发电功率超1kw用普通电线也不会过载），然后接线至变压器左端，变压器右端接总功率不超过1kw的用电器。 其实很多中文社区比如贴吧里就有很详细的说明，你可以直接去贴吧看看。 Link to comment Share on other sites More sharing options...
Kasuha Posted June 9, 2017 Share Posted June 9, 2017 Power in ONI does not work like in real life. the load is put on whole grid, all connected pieces of wire. You need to use transformers to branch off heavy wire to small 1 kW grids that can run on standard wire. You can see schema in the power grid overlay. Link to comment Share on other sites More sharing options...
Mars0116 Posted June 10, 2017 Author Share Posted June 10, 2017 9 hours ago, Momotall said: 这个版本的电力规则就是所有通过导线连接起来的电池和用电器算一个回路，只要回路中用电器总功率超了1KW，就算用了一部分高压线也还是会过载。 解决方案就是把所有发电机和电池组用导线连接（这版本就算发电功率超1kw用普通电线也不会过载），然后接线至变压器左端，变压器右端接总功率不超过1kw的用电器。 其实很多中文社区比如贴吧里就有很详细的说明，你可以直接去贴吧看看。 太感谢了~！ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.