Momotall

  • Content count

    17
  • Joined

  • Last visited

Community Reputation

7 Neutral

About Momotall

  • Rank
    Junior Member
  1. Hydrogen Just Vanished

    Yeah, I met this bug too. After some cycles there are only polluted oxygen in my oxygen condensation tower. Hydrogen don't have a mass loss in thermo regulator so there must be a hydrogen mass loss in oxygen phase change, gas vent or gas filter.
  2. The outlet pressure is too large

    我开debug试了一下,出口气压大于1000kg的时候即是不是液体也会出现压力过大的情况。
  3. The outlet pressure is too large

    要么上个图要么说明文字说明更详细一点啊,那个Steps to Reproduce是要求写复现bug的步骤的。
  4. There exists a bug in liquid heat and temperature when liquid flows vertically that the total heat of the system loses during flowing(Verson AU-219035). By using this bug a player can cool quantities of hot water from steam geyser to room temperature easily, so it will have a bad influence on the balance of the game. Here I'll show you 2 examples on how to make use of this bug. Case 1: 1.There's a pool of hot water in 363.15K surrounded by insulated tiles and vacuum, put some dirty water and water like i do in the next 3 pictures. 2.put some of water in low tempterature on the 3 top positions and they will flow down.(I used 1000kg 280K water) 3.You will see this when pressing F3. 4.repeat this several times and you get a pool of cool water. (I repeated 3 times and cooled the water to 294K ) 9t 280K water cooled 132t 393.15K water to 294K. That's impossible in real world's thermodynamics, so there is a bug in heat transferring. Case 2 1.Prepare insulated walls, vacuum surroundings and cooled ladders(granite for high heat compacity and conductivity). Water is 393.15K, ladders cooled to 251.9K 2.Pour hot water from above. First level of the ladder were heated to 358.8K. 3.When the water level reached the 2nd level of ladder, there will be a sudden drop of temperature in water. As you can see in the pic, the temperature suddenly dropped to 313K and if you lower the flow rate of water the temp change will be larger. Apparently 200kg of granite ladder cannot absorb so much heat, so a large quantity of heat just VANISHED during the heat transfer process. Players can use this method to cool hot water with low flow rate easily.