There is a problem with the mechanical airlock

I noticed you're playing with the Self-sealing Airlocks Revived mod. If you disable your mods does it still happen? Could you attach a video of the issue? Thanks.

3 hours ago, EricKlei said:

我注意到你在玩自封气闸复活模组。如果你禁用了模组，还会发生吗？你能附上问题的视频吗？谢谢。

Before the update, we could use mechanical airlocks for high-pressure liquid storage. After the update, almost all door-push high-pressure systems became inoperative. I didn't see any updates related to this in the update log. Is this the intended update result or a bug caused by fixing the airlock heat exchange bug?

8 hours ago, zhongmotianqi said:

Before the update, we could use mechanical airlocks for high-pressure liquid storage. After the update, almost all door-push high-pressure systems became inoperative. I didn't see any updates related to this in the update log. Is this the intended update result or a bug caused by fixing the airlock heat exchange bug?

The automation state no longer triggers a sim update, which subtly affects the timing of these door pumps. What do you have your timer sensor set to? You might have to tweak it

15 hours ago, Tigin said:

自动化状态不再触发模拟更新，这会微妙影响这些门泵的时间。你的定时传感器设置成什么？你可能需要调整一下

Before the update, my mechanical airlock was set to 5s/4s without power, allowing for high-pressure storage of nuclear waste. However, after the update, no matter how I set it, it no longer works

7 hours ago, zhongmotianqi said:

Before the update, my mechanical airlock was set to 5s/4s without power, allowing for high-pressure storage of nuclear waste. However, after the update, no matter how I set it, it no longer works

Ah looking at your design again, this differs from my tests because I enclose my left chamber more, which prevents the nuclear waste from expanding too far out. The fluid equilibrium for the unpowered setups definitely seems to not be as tight, resulting in a lot more waste .(for what it's worth,  a 2s/1s powered door setup still worked fine for your setup) 

I've tried to provide some clarification on this here: