I observed some 1 tick pulsing on one of my prototype SR-latches.
I suppose it happened because of gate having one side with wire bridge and other without it.
Steps to Reproduce
1)Make SR-Latch so it has one wire bridge (all coordinates refer to top left corner of placed object) 1.1)Place OR gates at (0;1) (4;1) 1.2)Place NOT gate facing right at(2;2) and one facing left at (5;0) 1.3)Place wire bridge facing down at (4;0) 1.4)Connect (1;1)>>(2;1) left OR to NOT (2;1)>>(5;2) NOT to OR's input Should pass under bridge (6;1)>>(6;0)right OR to NOT (5;0)>>(4;0) NOT to bridge (4;2)>>(1;2) bridge to OR's input 2) add inputs to leftmost and rightmost input of left and right OR respectively 3)Flip one input (that having active out over(NOTs' outs)) on and off rapidly(works best at x1 speed)
1)Make SR-Latch so it has one wire bridge (all coordinates refer to top left corner of placed object) 1.1)Place OR gates at (0;1) (4;1) 1.2)Place NOT gate facing right at(2;2) and one facing left at (5;0) 1.3)Place wire bridge facing down at (4;0) 1.4)Connect (1;1)>>(2;1) left OR to NOT (2;1)>>(5;2) NOT to OR's input Should pass under bridge (6;1)>>(6;0)right OR to NOT (5;0)>>(4;0) NOT to bridge (4;2)>>(1;2) bridge to OR's input 2) add inputs to leftmost and rightmost input of left and right OR respectively 3)Flip one input (that having active out over(NOTs' outs)) on and off rapidly(works best at x1 speed)
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now