Linux - game does not start

You think it might be your specs yet you failed to provide such info. Are you aware of how many i5s there are?

Edited December 2, 2017 by AlexRou

11 hours ago, AlexRou said:

You think it might be your specs yet you failed to provide such info. Are you aware of how many i5s there are?

Good point. Here is what steam reports about the hardware:

Computer Information:
    Manufacturer:  Unknown
    Model:  Unknown
    Form Factor: Desktop
    No Touch Input Detected

Processor Information:
    CPU Vendor:  GenuineIntel
    CPU Brand:  Intel(R) Core(TM) i5-7260U CPU @ 2.20GHz
    CPU Family:  0x6
    CPU Model:  0x8e
    CPU Stepping:  0x9
    CPU Type:  0x0
    Speed:  3400 Mhz
    4 logical processors
    2 physical processors
    HyperThreading:  Supported
    FCMOV:  Supported
    SSE2:  Supported
    SSE3:  Supported
    SSSE3:  Supported
    SSE4a:  Unsupported
    SSE41:  Supported
    SSE42:  Supported
    AES:  Supported
    AVX:  Supported
    CMPXCHG16B:  Supported
    LAHF/SAHF:  Supported
    PrefetchW:  Unsupported

Operating System Version:
    Debian GNU/Linux 9.2 (stretch) (64 bit)
    Kernel Name:  Linux
    Kernel Version:  4.9.0-4-amd64
    X Server Vendor:  The X.Org Foundation
    X Server Release:  11902000
    X Window Manager:  KWin
    Steam Runtime Version:  steam-runtime-beta-release_2017-07-24

Video Card:
    Driver:  Intel Open Source Technology Center Mesa DRI Intel(R) Kabylake GT3 x86/MMX/SSE2
    Driver Version:  3.0 Mesa 13.0.6
    OpenGL Version: 3.0
    Desktop Color Depth: 24 bits per pixel
    Monitor Refresh Rate: 60 Hz
    VendorID:  0x8086
    DeviceID:  0x5926
    Revision Not Detected
    Number of Monitors:  1
    Number of Logical Video Cards:  1
    Primary Display Resolution:  1600 x 1200
    Desktop Resolution: 1600 x 1200
    Primary Display Size: 14,45" x 10,83" (18,03" diag)
                                            36,7cm x 27,5cm (45,8cm diag)
    Primary VRAM Not Detected

Sound card:
    Audio device: Realtek ALC283

Memory:
    RAM:  7879 Mb

Miscellaneous:
    UI Language:  English
    LANG:  sv_SE.UTF-8
    Total Hard Disk Space Available:  225246 Mb
    Largest Free Hard Disk Block:  47583 Mb
    VR Headset: None detected

Recent Failure Reports:

 

When you said it got to 100% CPU usage and then nothing ... did you force close the game? Judging from your CPU it could just be it takes a while to load. I have a i5-4278U (basically a slightly higher clock version of your CPU) and it takes like 20 seconds (in linux) before the main menu shows up.

Edited December 2, 2017 by AlexRou

Most games run on Linux or Mac using Steam consume 100% CPU.

My experience so far with the Linux build looks like this:

1. After clicking "Play" the games seems to run (Steam, launches it, screen turns black)
2. A guy cleaning the toilet is shown but instead of letters there just filled rectangles.
3. An usual screen informing about the early access potential bugs is shown; music starts to play.
4. Before I manage to click "Thanks for the heads up" the game quits.

My system information:

Computer Information:
    Manufacturer:  Unknown
    Model:  Unknown
    Form Factor: Laptop
    No Touch Input Detected

Processor Information:
    CPU Vendor:  GenuineIntel
    CPU Brand:  Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz
    CPU Family:  0x6
    CPU Model:  0x4e
    CPU Stepping:  0x3
    CPU Type:  0x0
    Speed:  2800 Mhz
    4 logical processors
    2 physical processors
    HyperThreading:  Supported
    FCMOV:  Supported
    SSE2:  Supported
    SSE3:  Supported
    SSSE3:  Supported
    SSE4a:  Unsupported
    SSE41:  Supported
    SSE42:  Supported
    AES:  Supported
    AVX:  Supported
    CMPXCHG16B:  Supported
    LAHF/SAHF:  Supported
    PrefetchW:  Unsupported

Operating System Version:
    Linux Mint 18.2 Sonya (64 bit)
    Kernel Name:  Linux
    Kernel Version:  4.13.0-17-generic
    X Server Vendor:  The X.Org Foundation
    X Server Release:  11905000
    X Window Manager:  GNOME Shell
    Steam Runtime Version:  steam-runtime-beta-release_2017-07-24

Video Card:
    Driver:  Intel Open Source Technology Center Mesa DRI Intel(R) HD Graphics 520 (Skylake GT2) x86/MMX/SSE2
    Driver Version:  3.0 Mesa 17.2.2
    OpenGL Version: 3.0
    Desktop Color Depth: 24 bits per pixel
    Monitor Refresh Rate: 59 Hz
    VendorID:  0x8086
    DeviceID:  0x1916
    Revision Not Detected
    Number of Monitors:  3
    Number of Logical Video Cards:  1
    Primary Display Resolution:  1680 x 1050
    Desktop Resolution: 4624 x 1280
    Primary Display Size: 18,50" x 11,81" (21,93" diag)
                                            47,0cm x 30,0cm (55,7cm diag)
    Primary VRAM Not Detected

Sound card:
    Audio device: Realtek ALC293

Memory:
    RAM:  15911 Mb

Miscellaneous:
    UI Language:  English
    LANG:  pl_PL.UTF-8
    Total Hard Disk Space Available:  433421 Mb
    Largest Free Hard Disk Block:  26106 Mb
    VR Headset: None detected

Recent Failure Reports:

 

2 hours ago, minder said:

Most games run on Linux or Mac using Steam consume 100% CPU.

My experience so far with the Linux build looks like this:

1. After clicking "Play" the games seems to run (Steam, launches it, screen turns black)
2. A guy cleaning the toilet is shown but instead of letters there just filled rectangles.
3. An usual screen informing about the early access potential bugs is shown; music starts to play.
4. Before I manage to click "Thanks for the heads up" the game quits.

Please make your own bug report as your situation seems unrelated to this report, also attach the game logs from ~/.config/unity3d/Klei/Oxygen Not Included/Player.log

On 12/2/2017 at 1:51 PM, AlexRou said:

When you said it got to 100% CPU usage and then nothing ... did you force close the game? Judging from your CPU it could just be it takes a while to load. I have a i5-4278U (basically a slightly higher clock version of your CPU) and it takes like 20 seconds (in linux) before the main menu shows up.

First time I closed it (by doing "kill -9 pid" as there was no window) after a few minutes. I then tried again and let it run. After a while it quit on its own (checked ~10 minutes later).

8 hours ago, Carburetto said:

First time I closed it (by doing "kill -9 pid" as there was no window) after a few minutes. I then tried again and let it run. After a while it quit on its own (checked ~10 minutes later).

This is weird, do you have the log from the 10 min run? The one you posted doesn't have anything that stands out, thinking maybe from 10 mins we might have something.