Jump to content

Can't get liquid tepidizer to work


Recommended Posts

Returned to ONI for the first time after the Thermal Update.

I wanted to warm up my water supply to grow the Reed for clothing. I connected it to a large battery with a thermo switch between to keep the temperature in check. The tepidizer claims to have no power, thermo switch claims that the wire is disconnected. I thought that maybe regular wire can't support the needed power so I rebuild the entire network using Heavi-Watt wire. Same result. 

What am I doing wrong? (pictures attatched)

photo1.jpg

photo2.jpg

No, the water was around 22C, and the regulator was set between 25C-40C. 

I rebuilt wiring around the power generater so it goes directly to the battery and from the battery to the tepidizer. I also deconstructed the regulator.

One of those helped. I will try to rebuild the regulator to see if it will work now
 

Only now my poor dupe isn't able to generate enough energy to feed the heater:-)

Archived

This topic is now archived and is closed to further replies.

Please be aware that the content of this thread may be outdated and no longer applicable.

×
  • Create New...