Mr. Tropical Posted October 31, 2023 Share Posted October 31, 2023 I was wondering if anybody can help me out on how to set up a switch by the use of liquid pressure sensor. For example when it reaches 1 sensor the pump active but when it reaches the other sensor it deactivates. Any Helps?? Link to comment Share on other sites More sharing options...
blakemw Posted November 1, 2023 Share Posted November 1, 2023 Wrong forum (should be in general discussion), but this is where you want a Memory Toggle, AKA S/R Latch, it does precisely what you want. You send a green signal from the "ON" sensor into the "S"ignal port on the Memory Toggle, this causes the memory cell to send a continuous green signal out the output port until it receives a green signal into the "R"eset port. You send a green signal from the "OFF" sensor to the "R"eset port on the Memory Toggle, this causes the memory cell to send a red signal until it gets a green signal in the "S"ignal port. So it'd look something like this: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.