Omaristalis Posted January 13, 2023 Share Posted January 13, 2023 EDIT: Never mind, I had a little water on the tile on the neutronium. That boiled and it overpressured. Going to drop some petroleum there and see what happens! Now I was quite prepared for this cool steam vent to overpressure when I boiled all the water in the lower section with an aquatuner, but for some reason it's still emitting even at 700kg+ steam pressure. Has something changed here? I did a search and everything says 5kg of pressure. Link to comment https://forums.kleientertainment.com/forums/topic/145549-cool-steam-vent-not-overpressuring/ Share on other sites More sharing options...
Omaristalis Posted January 13, 2023 Author Share Posted January 13, 2023 A layer of petroleum lets it vent. I'm happy with this, but I always thought it was the second tile up that made the difference! Link to comment https://forums.kleientertainment.com/forums/topic/145549-cool-steam-vent-not-overpressuring/#findComment-1617486 Share on other sites More sharing options...
tuxii Posted January 13, 2023 Share Posted January 13, 2023 Don't be fooled. It looks like it's emitting. It even says it's emitting. For some reason under 5 kg liquid in its bottom tiles produces this behavior. But it is not actually emitting. The pressure in that room will not rise as long as it's above 5 kg. Link to comment https://forums.kleientertainment.com/forums/topic/145549-cool-steam-vent-not-overpressuring/#findComment-1617501 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.