Jump to content

Remote Worker Dock / Remote Worker - Flooding / Gear Oil / Remote Worker Dock unusable

Hansdampf1337

By Hansdampf1337

    • Branch: Live Branch Version: Windows Pending

I experience some Bugs with the Remote Worker Dock and the Remote Worker

1) Flooding Bug:

When i build the Remote Worker Dock i can flood the Area (i tryed up to 600kg of crude Oil) and it is still working and there is no alert that the building is flooded. After reloading the save the dock is no longer working and alert says that the building is flooded.

When i then pump the Liquid down to 100kg it is still not working and the alerts are still there until i reload the save. Then everyting works normal again.

This happens every time so it should be easy to reproduce.

1_noFlooding.jpg.2078e32fb474ac1f9dcb1ecf264ed835.jpg

1_FloodedAfterReload.jpg.e918b198fdea0a137d04ce950c2c65d2.jpg

1_FloodedWithLowLiquid.jpg.0663f3f1b82deee9271c8f368b44ed68.jpg

 

 

 

2) No Gear Oil Bug:

The Remote Worker Dock contains 50kg of Crude Oil as Gear Oil and has Power. Liquid Input Pipes contains Oil and the Output is connectet to Pipes and Storage, the Remote Worker has Power but says: no Gear Oil

-> after deconstructing and rebuilding the dock it works.

I couldnt find a way to reliable reproduce this bug but it happend often enough to to me to report it

 

2_RemoteWorkerNoGearOil.jpg.791f5b879b873a4f689ac0c67d905aa8.jpg

 

 

3) Empty Pipe Bug:

The Remote Worker Dock is unusable (Remote Controller says: "Remote Worker Dock unusable") if there is the "Empty Pipe" alert, even if the Dock and the Worker are full of Oil.

The Dock also turns dark if there is no Oil in the Pipe even when full of Oil.

If there is Oil in the Pipe for a short time and a Dupe picks the task before the Pipe is empty again than the Dupe will finish the task despite the "Empty Pipe" alert and the Dock turned dark.

 

3_DockUnusable.jpg.34ea0ef7760ce8687a35afa3e0ba4152.jpg

 

 

 

Steps to Reproduce

1) Flooding Bug:

a) build a Remote Worker Dock

b) pump a lot of Crude Oil on the tile with the Remote Worker Dock -> no flooding

c) save and reload -> Remote Worker Dock is flooded

d) drain the Liquid down to 100kg -> Remote Worker Dock is still flooded

e) save and reload -> no flooding

 

2) No Gear Oil Bug:

I couldnt find a way to reliable reproduce this bug but it happend often enough to to me to report it

 

3) Empty Pipe Bug:

a) build a Remote Worker Dock and Remote Controller

b) pump Oil in the Dock an the Remote Worker

c) empty the pipe from any Oil

d) try to use this Dock with a Remote Controller -> "Remote Worker Dock unusable"

e) put Oil on every secont piece of the pipe and let a constant flow through the Liquid intake of the Remote Worker Dock

f) watch the Dock goes on and off depending if there is Liquid in the piece of pipe connected to the intake or not

g) watch the status of the Errands in the Remote Controller change depending if there is Liquid in the piece of pipe connected to the intake or not

 

 

 

Go to bugs

User Feedback


Tigin

This behavior is not specific to remote workers. Floodable buildings only check if they're flooded when one of its cells change to/from a liquid or on load, not when the mass of the liquid changes . You should be mindful of the flood limit if you don't want your buildings to be flooded (35% of the default mass of crude oil, or 304.5kg) although I agree instant feedback of flooding would be nice

Share this comment

Link to comment
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...