Sign in to follow this  

Conveyor rail content don't exchange heat if they are in miligram range


ThePiachu
  • Branch: Live Branch Version: Windows Pending

I've ran into a peculiar bug when dealing with conveyor rails - their content doesn't exchange heat with the environment if the content is in the miligram range.

I have a setup like in the screenshot - a metal volcano tamer that feeds into a conveyor rail with a temperature sensor that activates the exit from the system (the bottom chute is disconnected). When it works as intended it's really neat - the stuff on the rails exchanges heat with the surrounding steam, cools everything down and then you can ship the metal out without having to do multiple passes through a chute and auto loader. You run into problems when you're dealing with live volcanoes though - they drop their contents in small batches, so the auto sweeper loads as little as a few miligrams of metal to load. This causes the conveyor rails to move that around and probably due to optimisation such small quantities of materials don't exchange heat with the surrounding and you end up with 700C gold sitting in 120C steam and not budging a degree. You also get some empty packets of shipments on the conveyor rails, but that's some other bug it seems.

It would be nice to perhaps force the rail content to exchange heat with the surroundings no matter how small it is, otherwise temperature sensors for the rails may cause inaccurate readings that grind the rail to a halt...

Metal Tamer Bug.png


Steps to Reproduce

Open up the save and check the active gold volcano tamer - if you have a tiny packet of metal being shipped it will halt, but will work perfectly with big chunks of metal.

From scratch:

- Set up a conveyor rail with a temperature sensor
- Load up 1mg of gold at 700C in a steam room
- Move the gold on the rail - it will stay really hot despite the room being way colder

Sign in to follow this  


User Feedback


....

Can confirm this one. Have it in an iron volcano, one 5.7mg batch sitting at 1470,8°C (which I manually let through by changing the below to above in the temp sensor) followed by another batch of 953 mcg at 1390,4°C

 

ONI iron cooling bug.jpg

Edited by Turalyon

Share this comment


Link to comment
Share on other sites
.... ....

The same bug also makes cleaning up a problem at times. I had a dupe bring a small microgram amount of ice to my steam room loader, which then got moved on the conveyor rail and dumped into 100C+ liquid phosphorus, only for it not to melt on the rail or in the liquid, then proceed to be picked up again and again and put on the same rail.

Share this comment


Link to comment
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now