TheGCat Posted July 19, 2019 Share Posted July 19, 2019 18 hours ago, Caochu said: *Notice the nice geometry eye-candy* *Notice the magma pool on the top of the base * *Stare at the magma pool on the top of the base * *Wonder what could happen if a destructive duplicant break some tiles* *Internally scream in german* *Externally* : I love your base and the way you incorporate the different geysers in your design Thanks. The Magma Pool has two border tiles. Normally! Thanks for your point. I have forgotten to build the second border on the left side. A dupe must be destroy both to start the disaster. But sure, it is possible Unfortunately, the energy production is missing on the screen (Too small to see it). On top of the base is the Liquid CH4/O2/H2. The Methan(CH4) Production cool the entire Methan Power buildings from -60C till -10C. So frosty there. I use the same Methan Chamber to freeze (Steam) or liquefy (methan/sourgas) the steam/methan from the bottom of the map. The Oil biome is full of steam. I freeze it in the chamber and use it later to cool the salt water geyser. At the bottom is the Petroleum&Ethanol power field. I use the hot P-Water for the Pinchas. My phosphorite production is still not enough to satisfy all buildings (Pinchas/Wheezeworts). Haven't count it, but there are round about 60 Pincha plants. 3 complete drecko ranches with at least 7 dreckos each in there. 14 normal dreckos and 7 glossy dreckos. When my savegame runs again (currently broken after the update yesterday) I can post some pics of it if you want. Not all sections are finished yet. Few of them need to expand or to rebuild a bit. I like to view by myself others bases. I saw some interesting things. And sometimes I found a easier solution (No exploit!) for a problem as I used before. Have a nice day. PS: Der Vulkan war eigentlich auch nur was für's Auge. Brauchen tue ich den nicht, denn ich habe so viele Hitzequellen auf der Map (Selbst verursacht oder durch Geysire), da kommt es auf den einen Vulkan mehr oder weniger auch nicht mehr an. Selbst wenn ich den nutzen würde um ein paar Dampfturbinen zu befeuern, so hätte ich trotzdem das Problem, dass ich diese auch kühlen müsste. Ob das nun im Nachhinein effizient wäre weiß ich nicht. Denn für die Kühlung benötige ich wiederum auch wieder Strom. Da weit und breit auch sonst keines meiner anderen Kühlkreisläufe in Reichweite ist... soll der einfach nur da stehen und gut aussehen und hin und wieder "seine Tage" haben. Menstruation halt. höhöhö Link to comment Share on other sites More sharing options...
Angpaur Posted July 19, 2019 Share Posted July 19, 2019 10 hours ago, JohnFrancis said: This is my Mk3 base, slide show tower. 80 dupes (6 in rockets), 160 slicksters and 1 FPS. I like the cycle number Has the apocalypse arrived? Link to comment Share on other sites More sharing options...
xialeth Posted July 19, 2019 Share Posted July 19, 2019 Probably not really base-porn, but this is my first base that survived for like more than 60 cycles (though I'm definitely running into issues with my coal consumption and have not quite figured out how to use other resources for energy production...). Used the miscalculated pod-location trait (on launch_preview), and didn't realize until waaaaaay too late that oil was all the way down (this is my current goal, along with 'utilize the nat gas geyser and get enough plastics to build a steam turbine before the Cool Steam Geyser erupts again xD 135 cycles, 15 dupes. Link to comment Share on other sites More sharing options...
Hakon Posted July 19, 2019 Share Posted July 19, 2019 My colony from qol 3, it's kind of a mess compared to these other bases but it worked for me. 36 dupes total, cycle 1815 and only 2 cool steam for water from geysers. Link to comment Share on other sites More sharing options...
bebar69 Posted July 19, 2019 Share Posted July 19, 2019 725 cycle - 12 dup I will refund Slickster farm Link to comment Share on other sites More sharing options...
goboking Posted July 19, 2019 Share Posted July 19, 2019 I squeezed everything I could into this colony without sacrificing aesthetics, but I'll have to go back to the drawing board with all the new toys coming in the Launch Upgrade. Link to comment Share on other sites More sharing options...
chasinji Posted July 21, 2019 Share Posted July 21, 2019 On 7/18/2019 at 6:05 AM, QuQuasar said: Starjack Citadel My eyes is bleeding seeing your magnificent base. what tools do you use to make shape like yours? mind to share what tools, tricks and dedications you poured into it? please. Link to comment Share on other sites More sharing options...
QuQuasar Posted July 21, 2019 Share Posted July 21, 2019 5 minutes ago, chasinji said: My eyes is bleeding seeing your magnificent base. what tools do you use to make shape like yours? mind to share what tools, tricks and dedications you poured into it? please. It's pretty much all MS Paint. Be aware, though, that MS Paint circles aren't always symmetrical. Curves are easiest to remember as a sequence of numbers. If you can remember one eighth of it, you can repeat the sequence another 7 times to complete the circle. For instance, a diameter 52 circle is "5, 4, 2, 2, 1, 2, 1, 1". I also unlocked sandbox right at the start of the game, revealed the map, and used the measurements in the dig tool to find the centerline of the map so I could orient my base around it rather than around the printing pod. Link to comment Share on other sites More sharing options...
pacovf Posted July 22, 2019 Share Posted July 22, 2019 Here's mine, from early QoL 3 (I haven't had much time to play). 6-dupe only. It's not much, but it's home. As you can see, I never outgrew my tendency to leave abyssalite alone, from all the way back in the Thermal upgrade. I've left 99% of it untouched. Makes for very awkward builds Spoiler My main base (I have a flatulent dupe): Spoiler My subsurface outpost: Spoiler Link to comment Share on other sites More sharing options...
xialeth Posted July 22, 2019 Share Posted July 22, 2019 6 hours ago, pacovf said: Here's mine, from early QoL 3 (I haven't had much time to play). 6-dupe only. It's not much, but it's home. As you can see, I never outgrew my tendency to leave abyssalite alone, from all the way back in the Thermal upgrade. I've left 99% of it untouched. Makes for very awkward builds Hide contents Can't help myself but find the abyssalite structures strangely pleasing. Especially the way they divide the biomes makes for a nice colour-separation. Also, is it just me or does that second-to-uppermost abyssalite structure look like a stick figure running/dancing? Link to comment Share on other sites More sharing options...
Saturnus Posted July 22, 2019 Share Posted July 22, 2019 51 minutes ago, xialeth said: Also, is it just me or does that second-to-uppermost abyssalite structure look like a stick figure running/dancing? It's definitely you. Link to comment Share on other sites More sharing options...
xialeth Posted July 22, 2019 Share Posted July 22, 2019 23 minutes ago, Saturnus said: It's definitely you. huh, weird xD To me it looks like a a-bit-wonky creature looking downwards, possibly staring at a phone in their hands as they're walking... or something xD (for a visual explanation, see the spoilercut) Spoiler (sorry for the wonky writing, couldn't find my drawing tablet quickly (and am supposed to be studying regardless) Link to comment Share on other sites More sharing options...
maGGe Posted August 8, 2019 Share Posted August 8, 2019 On 2019-07-20 at 12:56 AM, goboking said: I squeezed everything I could into this colony without sacrificing aesthetics, but I'll have to go back to the drawing board with all the new toys coming in the Launch Upgrade. I really love this layout, mind sharing some other pics, like water flow, gas flow and convayor overlay? Link to comment Share on other sites More sharing options...
goboking Posted August 13, 2019 Share Posted August 13, 2019 On 8/8/2019 at 2:47 AM, maGGe said: I really love this layout, mind sharing some other pics, like water flow, gas flow and convayor overlay? Certainly. Liquid Pipes Spoiler Gas Pipes Spoiler I prefer my dupes to do most of the labor themselves, so there isn't anything worth looking at on the conveyor overlay. If there's anything else you want to see, let me know. Link to comment Share on other sites More sharing options...
Moah Posted August 13, 2019 Share Posted August 13, 2019 53 minutes ago, goboking said: I prefer my dupes to do most of the labor themselves, so there isn't anything worth looking at on the conveyor overlay. If there's anything else you want to see, let me know. Temperature Overlay would be interesting. and circle nr. Link to comment Share on other sites More sharing options...
sktzofreak101 Posted August 14, 2019 Share Posted August 14, 2019 My base on Rime, I'm behind on progress for a 500+ cycle base, I know, but its my first long game. Link to comment Share on other sites More sharing options...
goboking Posted August 16, 2019 Share Posted August 16, 2019 On 8/13/2019 at 5:06 PM, Moah said: Temperature Overlay would be interesting. and circle nr. Sorry I'm late on this (again). Here's the temperature overlay. Note that I abandoned a liquid cooling system before calling it quits on the base, so climate control is rather crude. Spoiler Gas overlay. Spoiler Decor overlay. Spoiler Rooms overlay. Spoiler Link to comment Share on other sites More sharing options...
chemie Posted August 16, 2019 Share Posted August 16, 2019 I dont get the issue. if you think a particular package is OP, just dont take it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.
Please be aware that the content of this thread may be outdated and no longer applicable.